Betocrete-CP-360-WP Leistungserklärung GB docx.pdf
3 页数
75.4 KB
Download
<h1>Betocrete-CP-360-WP Leistungserklärung GB docx.pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>Betocrete-CP-360-WP <br />206446</p> <p>1.</p> <p>Unique identification code of the product type:</p> <p>EN 934-2:2009 + A1:2012:T9</p> <p>2. Intended use:</p> <p>Water resisting admixture for <br />concrete – EN 934-2:T9</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 2+</p> <p>5. Harmonised standard</p> <p>EN 934-2:2009 + A1:2012</p> <p>6. Notified test laboratory:</p> <p>The notified body Materialprüfungsamt <br />Hannover identification number 0764 <br />performed the initial inspection of the <br />manufacturing plant and of factory <br />production control and the continuous <br />surveillance, assessment and evaluation of <br />factory production control under system 2+.</p> <p>.</p> <p>7. Declared performance :</p> <p>Essential characteristic</p> <p>Chloride ion content <br />Alkali content <br />Corrosion behaviour <br />Compressive strength</p> <p>Capillary absorption</p> <p>Air content <br />Dangerous substances</p> <p>Performance</p> <p>max. 0,1 % by mass <br />max. 21 % by mass <br />Contains components only <br />from EN 934-1:2008, Annex A. <br />1 <br />At 28 days : <br />Test mix > 85 % of control mix <br />Tested for 7 days after 7 days <br />curing : test mix ≤ 50 % by <br />mass of control mix <br />Tested for 28 days after 90 <br />days curing : test mix ≤ 60 % <br />by mass of control mix <br />Test mix < 2 % by volume <br />above control mix <br />NPD</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical <br />specification</p> <p>System 2+</p> <p>DIN EN 934-2:2009 + <br />A1:2012</p> <p>The performance of the product identified above is in conformity with the set of declared <br />performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No <br />305/2011, under the sole responsibility of the manufacturer identified above.</p> <p>Signed for and on behalf of the manufacturer by: <br />Thomas Beyer, technician <br />(name and function)</p> <p>Detmold, 11.01.2017</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>https://www.schomburg.com/de/en/downloads/datasheets/materials_safety_data_sheet/d <br />or <br />https://www.schomburg.com/de/en/downloads/datasheets/technical_data_sheet/d</p>
