SampleSpecifications_Betocrete-C waterproofing system 4419.pdf
30 页数
340.6 KB
Download
<h1>SampleSpecifications_Betocrete-C waterproofing system 4419.pdf</h1> <p>Page 1</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />Table of contents</p> <p>1</p> <p>Building Waterproofing</p> <p>2</p> <p>1.1</p> <p>Waterproofing of building components made from concrete (waterproof concrete)</p> <p>2</p> <p>1.1.1</p> <p>Manufacture of waterproof concrete</p> <p>2</p> <p>1.1.1.1</p> <p>Internal concrete sealing with crystalline concrete admixtures</p> <p>2</p> <p>1.1.2</p> <p>Injections of construction joints</p> <p>4</p> <p>1.1.2.1</p> <p>Construction joint sealing with injection hose (AQUAFIN CJ1)</p> <p>4</p> <p>1.1.3</p> <p>Swelling joint tape</p> <p>6</p> <p>1.1.3.1</p> <p>Construction joint sealing with swelling joint tape made from thermoplastic (AQUAFIN-CJ6)</p> <p>6</p> <p>1.1.3.2</p> <p>Construction joint sealing with swelling joint tape made from bentonite with rain protection <br />(AQUAFIN-CJ4)</p> <p>9</p> <p>1.1.3.3</p> <p>Construction joint sealing with swelling joint tape made from bentonite (AQUAFIN-CJ3)</p> <p>12</p> <p>1.1.4</p> <p>Joint sheets</p> <p>15</p> <p>1.1.4.1</p> <p>Construction joint sealing with crystalline-coated joint sheet (AQUAFIN-CJ5)</p> <p>15</p> <p>1.1.5</p> <p>Joint tapes</p> <p>18</p> <p>1.1.5.1</p> <p>Waterproofing of construction and movement joints with waterstops made from PVC <br />(AQUAFIN-EJ-W)</p> <p>18</p> <p>1.1.6</p> <p>Waterproofing with composite film on fresh concrete</p> <p>22</p> <p>1.1.6.1</p> <p>Waterproofing with FBV system (AQUAFIN-WM12)</p> <p>22</p> <p>1.1.7</p> <p>Waterproofing of pipe penetrations</p> <p>27</p> <p>1.1.7.1</p> <p>Waterproofing of pipe penetrations with swelling joint tape made from thermoplastic <br />(AQUAFIN-CJ6)</p> <p>27</p> <p>Waterproofing of pipe penetrations with pre-made cementitious coated pipe penetration <br />(AQUAFIN-PP)</p> <p>28</p> <p>Compilation</p> <p>30</p> <p>1.1.7.2</p> <p>Page 2</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1</p> <p>Building Waterproofing</p> <p>1.1</p> <p>Waterproofing of building components made from concrete <br />(waterproof concrete)</p> <p>1.1.1</p> <p>Manufacture of waterproof concrete</p> <p>1.1.1.1</p> <p>Internal concrete sealing with crystalline concrete admixtures <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Crystalline concrete admixture BETOCRETE <br />To support the self-healing properties of waterproof concrete, a so-called <br />crystalline concrete admixture can be used. The crystalline substance, which <br />is distributed across the entire waterproof construction, reacts upon contact <br />with water and fills in fine cracks and capillary pores with nano-crystals. <br />The concrete must comply with all of the structural planning requirements <br />and be ordered in accordance to the properties. For this purpose, <br />preliminary testing must be carried out with the crystalline concrete <br />admixture in the concrete plant. <br />The crystalline concrete admixture BETOCRETE verifiably fulfils the <br />properties as: <br />1. BETOCRETE-CL170-P: Plasticizer in accordance with EN-934-2, <br />table 2. <br />2. BETOCRETE-CL210-WP: Liquid waterproofer in <br />accordance with EN-934-2, table 9. <br />3. BETOCRETE-CP360-WP: Powdered waterproofer in accordance <br />with EN-934-2, table 9. <br />4. BETOCRETE-CP350-CI: Powdered crystalline admixture with <br />added corrosion inhibitor <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.1.1.010</p> <p>Concrete admixture: Plasticizer <br />Liquid concrete admixtures for crystalline waterproofing, in this case as <br />plasticizer in accordance with EN-934-2, table 2. <br />Reduction of the water penetration under pressure of at least 8mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CL170-P <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.)</p> <p>1 m³</p> <p>......................</p> <p>..............................</p> <p>Page 3</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>1.1.1.1.020</p> <p>Concrete admixture: Waterproofer (liquid)</p> <p>Unit price EURO Total amount EURO</p> <p>Liquid concrete admixtures for crystalline waterproofing, in this case as a <br />waterproofer in accordance with EN-934-2, table 9. <br />Reduction of the water penetration under pressure of at least 8mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CL210-WP <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.)</p> <p>1 m³ <br />1.1.1.1.030</p> <p>......................</p> <p>..............................</p> <p>Concrete admixture: Waterproofer (powdered) <br />Powdered concrete admixtures for crystalline waterproofing, in this case as a <br />waterproofer in accordance with EN 934-2, table 9. <br />Reduction of the water penetration under pressure of at least 8mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CP360-WP <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.)</p> <p>1 m³ <br />1.1.1.1.040</p> <p>......................</p> <p>..............................</p> <p>Concrete admixture: Crystalline effect with corrosion inhibitor (powdered) <br />Powdered concrete admixtures for crystalline waterproofing including <br />additional corrosion inhibtor. <br />Reduction of the water penetration under pressure of at least 5mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CP350-CI <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.)</p> <p>1 m³</p> <p>......................</p> <p>..............................</p> <p>Total 1.1.1.1</p> <p>Internal concrete sealing with crystalline concrete admixtures</p> <p>..............................</p> <p>Total 1.1.1</p> <p>Manufacture of waterproof concrete</p> <p>..............................</p> <p>Page 4</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.2</p> <p>Injections of construction joints</p> <p>1.1.2.1</p> <p>Construction joint sealing with injection hose (AQUAFIN CJ1) <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Injection hose for waterproofing of construction joints in <br />concrete AQUAFIN-CJ1 <br />The injection hose is used for the waterproofing of building joints which are <br />subject to continuous or occasional exposure to the effects of groundwater, <br />hillside water and/or surface water. The structurally required construction <br />joints can be force-fitting and water pressure-tight. The waterproofing <br />injection of the AQUAFIN-CJ1 injection hose in construction joints in the <br />system with the elastic polyurethane injection resin AQUAFIN-P4 has been <br />generally approved by MPA Braunschweig (P-5032/9455). <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.2.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 5</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>1.1.2.1.020</p> <p>Injection hose laying</p> <p>Unit price EURO Total amount EURO</p> <p>Supply, assembly and laying of an injection hose for one-off grouting for <br />subsequent injections with elastic PU injection resin into damp or waterretaining construction joints in accordance with the manufacturer's <br />specifications. Laying takes place with a concrete covering of at least 8 <br />cm to the water-conducting side with a maximum hose length of 10 m. <br />Attachment and protection from floating takes place on the level substrate <br />using fastening clips at intervals of max. 15 cm. Subsequent injection <br />hoses are laid with an overlap of at least 10 cm. The currently valid <br />building approval test certificate must be presented before the start of <br />injection work. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ1 <br />Material requirement: approx. 1.00 m/m <br />1m <br />1.1.2.1.030</p> <p>......................</p> <p>..............................</p> <p>Grouting of the injection hose <br />Supply and application of an elastic PU injection resin in accordance with the <br />manufacturer's specifications. Injection hose (concrete age at least 28 days) <br />using commercially available injection pumps for polyurethane resins using <br />the high-pressure waterproofing grouting procedure, including documentation <br />of consumption. The injection hose must be re-injected at least once during <br />the processing time of approx. 30 mins at +18 °C. <br />SCHOMBURG reference products: <br />AQUAFIN-P4 <br />Material requirement: approx. 1.0 kg/running meter <br />1m</p> <p>1.1.2.1.040</p> <p>......................</p> <p>..............................</p> <p>Allowance for additional material consumption <br />Allowance for pre-positioning “Grouting the injection hose” for additional <br />material consumption of PU injection resin. <br />1 kg</p> <p>......................</p> <p>..............................</p> <p>Total 1.1.2.1</p> <p>Construction joint sealing with injection hose (AQUAFIN CJ1)</p> <p>..............................</p> <p>Total 1.1.2</p> <p>Injections of construction joints</p> <p>..............................</p> <p>Page 6</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.3</p> <p>Swelling joint tape</p> <p>1.1.3.1</p> <p>Construction joint sealing with swelling joint tape made from <br />thermoplastic (AQUAFIN-CJ6) <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Swelling joint tape made from thermoplastic AQUAFIN-CJ6 <br />AQUAFIN-CJ6 is used for interior waterproofing of construction joints in <br />concrete structures which are subject to continuous or occasional exposure <br />to groundwater, hillside water and/or surface water. AQUAFIN-CJ6 is <br />suitable for areas with fluctuating water levels. The construction joints can <br />be made watertight at an installation depth of up to 8 m. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.3.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 7</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.1.020</p> <p>Application of the thermoplastic swelling tape</p> <p>Unit price EURO Total amount EURO</p> <p>Supply and insertion of a thermoplastic swelling joint tape in a suitable <br />assembly adhesive. The assembly adhesive is generously applied to the <br />prepared substrate. The swelling joint tape must be pressed into the <br />adhesive within the open time until it oozes out on the underside. The <br />concreting process can take place no sooner than 8 hours after adhesion. <br />The swelling joint tape must be arranged so that there is a concrete covering <br />of at least 8 cm to the water-conducting side. Alternatively, swelling joint <br />tape can also be secured using steel nails (min. 5 nails per metre). When <br />doing so, it must be ensured that it is pressed onto the subsurface over the <br />entire area. Avoid loop formation and cavities. <br />The swelling behaviour is approx. 460% within 24h of application - in <br />demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ6 <br />Material consumption: 1.0 m/m <br />1m</p> <p>1.1.3.1.030</p> <p>......................</p> <p>..............................</p> <p>Allowance for application of swelling tape <br />Swelling joint tape can be applied with an overlap of at least 50 mm or buttjointed. Butt-jointed swelling tape connections must be secured with a <br />separate swelling tape with an overlap of at least 30 mm.</p> <p>SCHOMBURG reference products: <br />AQUAFIN-CJ6 <br />Material requirement: depending on application <br />1 pcs</p> <p>1.1.3.1.040</p> <p>......................</p> <p>..............................</p> <p>Supplying construction adhesive for fastening the swelling joint tape <br />Supply of construction adhesive for fastening the swelling joint tape. This <br />can also be used on a wet substrate. The assembly adhesive must fulfil the <br />requirements of EMICODE EC1+. <br />SCHOMBURG reference products: <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres.</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 8</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.3.1</p> <p>Construction joint sealing with swelling joint tape <br />made from thermoplastic (AQUAFIN-CJ6)</p> <p>Unit price EURO Total amount EURO</p> <p>..............................</p> <p>Page 9</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.2</p> <p>Construction joint sealing with swelling joint tape made from <br />bentonite with rain protection (AQUAFIN-CJ4)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Swelling joint tape made from bentonite with rain protection <br />AQUAFIN-CJ4 AQUAFIN-CJ4 is used for the internal waterproofing of <br />construction joints in concrete structures which are subject to continuous <br />or occasional exposure to groundwater, hillside water and/or surface <br />water. Use in water exchange zones is possible. AQUAFIN-CJ4 is <br />characterised by a strong, quick and reliable swelling behaviour whereby <br />the protective coating applied in the factory effectively delays premature <br />swelling caused by rain. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.3.2.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 10</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.2.020</p> <p>Application of bentonite swelling tape with rain protection</p> <p>Unit price EURO Total amount EURO</p> <p>Supply and insertion of a bentonite swelling joint tape in a suitable assembly <br />adhesive. The assembly adhesive is generously applied to the prepared <br />substrate. The swelling joint tape must be pressed into the adhesive within <br />the open time until it oozes out on the underside. The concreting process <br />can take place no sooner than 8 hours after adhesion. The swelling joint <br />tape must be arranged so that there is a concrete covering of at least 8 cm <br />to the water-conducting side. Alternatively, swelling joint tape can also be <br />secured using steel nails (min. 5 nails per metre). When doing so, it must be <br />ensured that it is pressed onto the subsurface over the entire area. <br />Avoid loop formation and cavities. <br />Premature swelling is prevented by the rain protection coating for up to 3 <br />days. The swelling behaviour is approx. 500% within 8 days of application in demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ4 <br />Material consumption: 1.0 m/m <br />1m</p> <p>1.1.3.2.030</p> <p>......................</p> <p>..............................</p> <p>Allowance for application of swelling tape <br />Swelling joint tape can be applied with an overlap of at least 50 mm or buttjointed. Butt-jointed swelling tape connections must be secured with a <br />separate swelling tape with an overlap of at least 30 mm.</p> <p>SCHOMBURG reference products: <br />AQUAFIN-CJ4 <br />Material requirement: depending on application <br />1 pcs</p> <p>1.1.3.2.040</p> <p>......................</p> <p>..............................</p> <p>Supplying construction adhesive for fastening the swelling joint tape <br />Supply of construction adhesive for fastening the swelling joint tape. This <br />can also be used on a wet substrate. The assembly adhesive must fulfil the <br />requirements of EMICODE EC1+. <br />SCHOMBURG reference products: <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres.</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 11</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.3.2</p> <p>Construction joint sealing with swelling joint tape made from <br />bentonite with rain protection (AQUAFIN-CJ4)</p> <p>Unit price EURO Total amount EURO</p> <p>..............................</p> <p>Page 12</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.3</p> <p>Construction joint sealing with swelling joint tape made <br />from bentonite (AQUAFIN-CJ3)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Swelling joint tape made from bentonite AQUAFIN-CJ 3 <br />AQUAFIN-CJ3 is used for the internal waterproofing of construction joints in <br />concrete structures which are subject to continuous or occasional exposure <br />to groundwater, hillside water and/or surface water. Use in water exchange <br />zones is straightforward. AQUAFIN-CJ3 is characterised by a strong, quick <br />and reliable swelling behaviour. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.3.3.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 13</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.3.020</p> <p>Application of the bentonite swelling tape</p> <p>Unit price EURO Total amount EURO</p> <p>Supply and insertion of a bentonite swelling joint tape in a suitable assembly <br />adhesive. The assembly adhesive is generously applied to the prepared <br />substrate. The swelling joint tape must be pressed into the adhesive within <br />the open time until it oozes out on the underside. The concreting process <br />can take place no sooner than 8 hours after adhesion. The swelling joint <br />tape must be arranged so that there is a concrete covering of at least 8 cm <br />to the water-conducting side. Alternatively, swelling joint tape can also be <br />secured using steel nails (min. 5 nails per metre). When doing so, it must be <br />ensured that it is pressed onto the subsurface over the entire area. <br />Avoid loop formation and cavities. <br />The swelling behaviour is approx. 500% within 8 days of application <br />in demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ3 <br />Material consumption: 1.0 m/m <br />1m</p> <p>1.1.3.3.030</p> <p>......................</p> <p>..............................</p> <p>Allowance for application of swelling tape <br />Swelling joint tape can be applied with an overlap of at least 50 mm or buttjointed. Butt-jointed swelling tape connections must be secured with a <br />separate swelling tape with an overlap of at least 30 mm.</p> <p>SCHOMBURG reference products: <br />AQUAFIN-CJ3 <br />Material requirement: depending on application <br />1 pcs</p> <p>1.1.3.3.040</p> <p>......................</p> <p>..............................</p> <p>Supplying construction adhesive for fastening the swelling joint tape <br />Supply of construction adhesive for fastening the swelling joint tape. This <br />can also be used on a wet substrate. The assembly adhesive must fulfil the <br />requirements of EMICODE EC1+. <br />SCHOMBURG reference products: <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres.</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 14</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.3.3</p> <p>Construction joint sealing with swelling joint tape made <br />from bentonite (AQUAFIN-CJ3)</p> <p>..............................</p> <p>Total 1.1.3</p> <p>Swelling join tapes in accordance with <br />DAfStb guideline “Watertight buildings made <br />from concrete”</p> <p>..............................</p> <p>Unit price EURO Total amount EURO</p> <p>Page 15</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.4</p> <p>Joint sheets</p> <p>1.1.4.1</p> <p>Construction joint sealing with crystalline coated joint sheet <br />(AQUAFIN-CJ5)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Crystalline-coated joint sheet AQUAFIN-CJ5 <br />AQUAFIN-CJ5 is used for interior waterproofing of construction joints in <br />concrete structures which are subject to continuous or occasional exposure <br />to groundwater, hillside water and/or surface water. <br />The joint sheet thus works both actively through a permanent bond with the <br />concrete as well as passively through circumference extension. Additionally, <br />a self-healing of the joint will take place thanks to the crystalline effect. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.4.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 16</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.4.1.020</p> <p>Application of the coated joint sheet</p> <p>Unit price EURO Total amount EURO</p> <p>Delivery and installation of the AQUAFIN-CJ5 joint sheet with crystalline <br />coating on both sides for sealing horizontal and vertical construction joints <br />from pressing water and non-pressing water as well as ground moisture. <br />Delivery including all of the required fasteners (mounting brackets, joint <br />clamps). <br />Installation takes place taking the manufacturer's specifications into <br />consideration in accordance with ETA-18/1106 and abP P-1202/099/19 <br />MPA-Braunschweig <br />With an overlap of ≥ 20 cm, the allowed maximum water pressure is 5.0 <br />bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ5 <br />Joint sheet width: 150 mm <br />Joint sheet length: 2000 mm <br />Packaging: 100 m packed in a crate, with 50 retaining clamps incl. <br />Material requirements: approx. 1.05 m/m</p> <p>1m</p> <p>1.1.4.1.030</p> <p>......................</p> <p>..............................</p> <p>Supplying retaining clamps as an allowance for overlapping <br />Supply of additional retaining clamps for crystalline coated joint sheets. The <br />retaining clamps are used to produce overlapping which prevents water <br />from running behind. <br />SCHOMBURG reference products: <br />Approx. 1 retaining clamp per 10 cm of sheet overlap. <br />(50 retaining clamps are included in the scope of delivery with per 100 m of <br />joint sheet.)</p> <p>1 pcs</p> <p>1.1.4.1.040</p> <p>......................</p> <p>..............................</p> <p>Supplying omega clamps for securing in the reinforcement <br />Supply of omega clamps for crystalline coated joint sheets for binding and <br />securing the sheets in the reinforcement. <br />SCHOMBURG reference products: <br />Omega clamp <br />Material requirement: approx. 1 clamp per m of joint sheet</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 17</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.4.1</p> <p>Construction joint sealing with crystalline coated <br />joint sheet (AQUAFIN-CJ5)</p> <p>..............................</p> <p>Total 1.1.4</p> <p>Joint sheet</p> <p>..............................</p> <p>Unit price EURO Total amount EURO</p> <p>Page 18</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.5</p> <p>Waterstops</p> <p>1.1.5.1</p> <p>Waterproofing of construction and movement joints with joint tape <br />made from PVC (AQUAFIN-EJ-W)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />AQUAFIN-EJ-W joint tapes in accordance with factory standard with abP <br />AQUAFIN-EJ is used for interior and exterior waterproofing of movement <br />joints in concrete structures which are subject to continuous or occasional <br />loads from pressure water and non pressure water. <br />Making connections on the building site <br />Joint strips are connected by means of welding. The halves to be connected <br />are melted and joined together whilst in a plastic state. For this purpose, the <br />two ends are cut straight and right-angled and then placed in a welding <br />device (e.g. Formtri SG 320 L). The halves to be joined together are aligned; <br />heated/melted; shifted; joined together and cooled by the ambient <br />temperature. Each device comes with the applicable welding instructions. <br />After the welding process, check the seam and rework or secure it if <br />necessary. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.5.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 19</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.5.1.020</p> <p>Application of internal construction joint waterstop <br />Internal construction joint tape made from PVC for construction joints in the <br />concrete construction for coating horizontal and vertical construction joints <br />from pressing and non-pressing as well as ground moisture. <br />The allowed maximum water pressure is 5.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-EJ-WHF-D-240 and AQUAFIN-EJ-WHF-D-300 <br />Elongation at break: ≥ 300% <br />Thickness of the expanding part: 3 mm <br />Wide: 240 mm or 300 mm <br />Required: approx 1.00m / <br />linear meter</p> <p>1m</p> <p>1.1.5.1.030</p> <p>......................</p> <p>..............................</p> <p>Application of external construction joint waterstop <br />External construction joint tape made from PVC for construction joints in the <br />concrete construction for sealing horizontal and vertical construction joints <br />from pressing water and non-pressing water as well as ground moisture. <br />The allowed maximum water pressure is 5.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-EJ-WR-D300 <br />Elongation at break: ≥ 300% <br />Thickness of the expanding part: 3mm <br />Wide: 300mm <br />Required: approx. 1.00m / linear meter</p> <p>1m <br />1.1.5.1.040</p> <p>......................</p> <p>..............................</p> <p>Application of internal movement joint waterstop <br />Internal movement joint tape made from PVC for expansion joints in the <br />concrete construction for sealing horizontal and vertical joints from pressing <br />and non-pressing water as well as ground moisture. <br />The allowed maximum water pressure is 5.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-EJ-WHF-D-240 and AQUAFIN-EJ-WHF-D-300 <br />Elongation at break: ≥ 300% <br />Thickness of the expanding part: 3 mm <br />Stop anchor quantity: 4 <br />Wide:240 mm or 300 mm <br />Required: approx 1.00m / linear meter</p> <p>1m</p> <p>......................</p> <p>..............................</p> <p>Page 20</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>1.1.5.1.050</p> <p>Application of external movement joint waterstop</p> <p>Unit price EURO Total amount EURO</p> <p>External movement joint tape made from PVC for construction joints in the <br />concrete construction for sealing horizontal and vertical construction joints <br />from pressing water and non-pressing water as well as ground moisture. <br />The allowed maximum water pressure is 5.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-EJ-WR-D300 <br />Elongation at break: ≥ 300% <br />Thickness of the expanding part: 3 mm <br />Stop anchor quantity: 4 <br />Width: 300mm <br />Required: approx. 1.00m / linear meter</p> <p>1m <br />1.1.5.1.060</p> <p>......................</p> <p>..............................</p> <p>Allowance for welded waterstop moulded parts, flat corners <br />Supply and installation of joint tape moulded parts, welded by the contractor <br />in the plant, manufactured as an allowance for the joint tape in the abovementioned position, here: flat corners.</p> <p>1 pcs <br />1.1.5.1.070</p> <p>......................</p> <p>..............................</p> <p>Allowance for welded waterstop moulded parts, perpendicular corners <br />Supply and installation of joint tape moulded parts, welded by the contractor <br />in the plant, manufactured as an allowance for the joint tape in the abovementioned position, here: perpendicular corners.</p> <p>1 pcs <br />1.1.5.1.080</p> <p>......................</p> <p>..............................</p> <p>Allowance for welded waterstop moulded parts, flat T-piece <br />Supply and installation of joint tape moulded parts, welded by the contractor <br />in the plant, manufactured as an allowance for the joint tape in the abovementioned position, here: flat T-piece.</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 21</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.5.1.090</p> <p>Allowance for welded waterstop moulded parts, perpendicular T-piece <br />Supply and installation of joint tape moulded parts, welded by the contractor <br />in the plant, manufactured as an allowance for the joint tape in the abovementioned position, here: perpendicular T-piece.</p> <p>1 pcs <br />1.1.5.1.100</p> <p>......................</p> <p>..............................</p> <p>Allowance for welded waterstop moulded parts, flat junction <br />Supply and installation of joint tape moulded parts, welded by the contractor <br />in the plant, manufactured as an allowance for the joint tape in the abovementioned position, here: flat junction.</p> <p>1 pcs <br />1.1.5.1.110</p> <p>......................</p> <p>..............................</p> <p>Allowance for welded waterstop moulded parts, perpendicular junction <br />Supply and installation of joint tape moulded parts, welded by the contractor <br />in the plant, manufactured as an allowance for the joint tape in the abovementioned position, here: perpendicular junction</p> <p>1 pcs</p> <p>1.1.5.1.120</p> <p>......................</p> <p>..............................</p> <p>Allowance for building site joining <br />Joints are completed on-site in accordance with the manufacturer’s <br />specifications. They must be manufactured professionally and the technical <br />notes of the manufacturer must be observed.</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Total 1.1.5.1</p> <p>Waterproofing of construction and movement joints with <br />waterstops from PVC (AQUAFIN-EJ-W)</p> <p>..............................</p> <p>Total 1.1.5</p> <p>Waterstops</p> <p>..............................</p> <p>Page 22</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.6</p> <p>Waterproofing with fresh concrete waterproofing membrane</p> <p>1.1.6.1</p> <p>Waterproofing with fresh concrete waterproofing membrane system <br />(AQUAFIN-WM12) <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Fresh concrete waterproofing membrane system <br />The sheet, consisting of a 1.2 mm thick, transparent PVC sheet with <br />strengthened polypropylene fleece, is the main part of the fresh concrete <br />waterproofing membrane system. <br />The sheet combined with waterproof concrete for external sealing from <br />pressing and non-pressing water as well as ground moisture is used on <br />components with demanding structural use (elevator shafts, computer <br />centres, etc.). The sheet prevents water from running behind due to the <br />mechanical bond with the fresh concrete. It corresponds to DIN SPEC <br />20000-202 as well as DIN EN 13967. <br />The sheet must be applied over construction joints. Additional measures are <br />necessary for movement joints. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.6.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level, pressure resistant substrate with <br />a sealed surface, free of gravel pockets, cavities, gaping cracks, dust and <br />adhesion inhibiting substances, sharp-edged or pointed components. <br />Laitance layers must be removed and cleared away mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 23</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>1.1.6.1.020</p> <p>Waterproofing with fresh concrete sheets</p> <p>Unit price EURO Total amount EURO</p> <p>The sheets must be laid in accordance with the manufacturer’s laying <br />guidelines in strips, overlapping in the horizontal and vertical area (min. 5 cm) <br />before concreting. The ends are connected by means of welding or bonding <br />(always welded when used as waterproofing in accordance with DIN 18533). <br />Formwork may not become deformed during the concreting work. In the case <br />of vertical applications, the top finishing rail must be secured using suitable <br />measures. <br />All overlaps and offcuts are included in the calculation of the unit price. Billing <br />takes place in accordance with the actual area. <br />The allowed maximum water pressure is 5.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />Required: approx 1.00m²/m² <br />PVC tape <br />Dimensions: 180mm x 2mm x 50m or 500mm x 1.2mm x 50m <br />Required: determined for the building site</p> <p>1 m² <br />1.1.6.1.030</p> <p>......................</p> <p>..............................</p> <p>Waterproofing butt joints, position requirements <br />Butt joints in the fresh concrete composite system are technically <br />coordinated to the corresponding object-related marginal conditions. <br />Specifically, the following joining techniques can be applied: <br />( ) Jointing using thermal welding <br />( ) Jointing using swell welding <br />( ) Jointing using assembly adhesive <br />SCHOMBURG reference products <br />AQUAFIN-CA assembly adhesive <br />1 pcs</p> <p>1.1.6.1.040</p> <p>......................</p> <p>..............................</p> <p>Waterproofing with fresh concrete sheets, allowance for coves <br />Complementary waterproofing on recesses designed as coves, e.g. <br />foundations, elevators, sump pumps, etc., as an allowance for the <br />waterproofing of the above-mentioned position, <br />SCHOMBURG reference products: <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />Required: approx 1.00m²/m²</p> <p>1 m²</p> <p>......................</p> <p>..............................</p> <p>Page 24</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.6.1.050</p> <p>Waterproofing with fresh concrete sheets, allowance for <br />wall formwork <br />Vertical fresh concrete sheets in the area of single and double-skin wall <br />formwork, as an allowance for the waterproofing of the above-mentioned <br />position. <br />SCHOMBURG reference products: <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />Required: approx 1.00m²/m²</p> <p>1 m² <br />1.1.6.1.060</p> <p>......................</p> <p>..............................</p> <p>Waterproofing with fresh concrete sheets, allowance for <br />outer corners <br />Prefabricated outer corners made from PVC suitable for fresh concrete <br />waterproofing membrane system supplied for the waterproofing of outer <br />corners and laid in accordance with the manufacturer's laying guidelines, as <br />an allowance for the waterproofing of the above-mentioned position. <br />SCHOMBURG reference products: <br />AQUAFIN-WM12 outer corner <br />Requirement: 1 pcs. per outer corner</p> <p>1 pcs <br />1.1.6.1.070</p> <p>......................</p> <p>..............................</p> <p>Waterproofing with fresh concrete sheets, allowance for inner corners <br />Prefabricated inner corners made from PVC suitable for fresh concrete <br />waterproofing membrane system supplied for the waterproofing of outside <br />corners and laid in accordance with the manufacturer's laying guidelines, as <br />an allowance for the waterproofing of the above-mentioned position. <br />SCHOMBURG reference products: <br />AQUAFIN-WM12 internal corner <br />Requirement: 1 pcs. per outer corner</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 25</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.6.1.080</p> <p>Waterproofing with fresh concrete sheets, allowance for <br />floor slab protrusions <br />Fresh concrete waterproofing membrane system supplied for the <br />waterproofing of floor slab protrusions and laid in accordance with <br />manufacturer's laying guidelines, as an allowance for the waterproofing of the <br />above-mentioned position. <br />SCHOMBURG reference products <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />Required: approx 1.00m²/m²</p> <p>1 m² <br />1.1.6.1.090</p> <p>......................</p> <p>..............................</p> <p>Waterproofing with fresh concrete sheets, allowance for <br />concrete base / wall pipe penetrations <br />Fresh concrete waterproofing membrane system supplied for the <br />waterproofing of concrete base / wall pipe penetration and laid in accordance <br />with manufacturer's laying guidelines, as an allowance for the waterproofing <br />of the above-mentioned position. <br />SCHOMBURG reference products <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />intersection diameter up to ............. mm <br />Required: approx. 1.00m²/m²</p> <p>1 pcs <br />1.1.6.1.100</p> <p>......................</p> <p>..............................</p> <p>Waterproofing with fresh concrete sheets, allowance for clamping location <br />Fresh concrete waterproofing membrane system supplied for the <br />waterproofing of the clamping location and laid in accordance with the <br />manufacturer's laying guidelines, as an allowance for the waterproofing of the <br />above-mentioned position. <br />SCHOMBURG reference products <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />Required: approx 1.00m²/m²</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 26</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.6.1.110</p> <p>Waterproofing with fresh concrete sheets, allowance for the bored <br />pile head connection</p> <p>Fresh concrete waterproofing membrane system supplied for the <br />waterproofing of the bored pile head connection and laid in accordance with <br />the manufacturer's laying guidelines, as an allowance for the waterproofing of <br />the above-mentioned position. <br />SCHOMBURG reference products <br />AQUAFIN-WM12 <br />Dimensions: 1.20m x 25m x 1.2mm = 30m² <br />bored pile head diameter up to ...... mm <br />Required: approx. 1.00m²/m²</p> <p>1 pcs</p> <p>Total 1.1.6.1</p> <p>Total 1.1.6</p> <p>......................</p> <p>..............................</p> <p>Waterproofing with fresh concrete waterproofing membrane system <br />(AQUAFIN-WM12)</p> <p>..............................</p> <p>Waterproofing with fresh concrete waterproofing membrane system</p> <p>..............................</p> <p>Page 27</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.7</p> <p>Waterproofing of pipe penetrations</p> <p>1.1.7.1</p> <p>Waterproofing of pipe penetrations with swelling joint tape <br />made from thermoplastic (AQUAFIN-CJ6)</p> <p>1.1.7.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1 pcs</p> <p>1.1.7.1.020</p> <p>......................</p> <p>..............................</p> <p>Sealing of intersections with thermoplastic swelling joint <br />tape <br />Supply and insertion of a thermoplastic swelling jointing tape into a suitable <br />assembly adhesive on the intersection. The assembly adhesive is <br />generously applied to the prepared substrate. The swelling joint tape must <br />be pressed into the adhesive within the open time until it oozes out on the <br />underside. The concreting process can take place no sooner than 8 hours <br />after adhesion. The swelling joint tape must be arranged so that there is a <br />concrete covering of at least 8 cm to the water-conducting side. When doing <br />so, it must be ensured that it is pressed onto the subsurface over the entire <br />area. Avoid loop formation and cavities. <br />The swelling behaviour is approx. 460% within 24h of application - in <br />demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ6 <br />Material requirement: approx. 1.0 m / <br />linear meter. <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres.</p> <p>1 pcs</p> <p>Total 1.1.7.1</p> <p>Waterproofing of intersections with swelling joint tape <br />made from thermoplastic (AQUAFIN-CJ6)</p> <p>......................</p> <p>..............................</p> <p>..............................</p> <p>Page 28</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.7.2</p> <p>Waterproofing of intersections with cementitious coated <br />pre-made penetrations (AQUAFIN-PP)</p> <p>1.1.7.2.010</p> <p>Preparation of the substrates</p> <p>Unit price EURO Total amount EURO</p> <p>Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1 pcs <br />1.1.7.2.020</p> <p>......................</p> <p>..............................</p> <p>Sealing of floor ducts <br />Floor duct with cementitious coating, verified watertight up to 5 bar with <br />sealing profile of approx. 12 cm. Install the floor duct in accordance with the <br />manufacturer's laying guidelines. <br />SCHOMBURG reference products: <br />Dimensions: approx. 50cm long, diameter: <br />( ) AQUAFIN-PP-F-110 <br />( ) AQUAFIN-PP-F-160 <br />( ) AQUAFIN-PP-F-200 <br />Material consumption: 1 pcs. per intersection</p> <p>1 pcs <br />1.1.7.2.030</p> <p>......................</p> <p>..............................</p> <p>Sealing of the wall ducts <br />Wall ducts with cementitious coating, verified watertight up to 5 bar with <br />double-sided plug-in sleeve. Install the wall duct in accordance with the <br />manufacturer's laying guidelines. <br />SCHOMBURG reference products: <br />Dimensions: Length must be determined according to the wall diameter, <br />available diameter: DN 110, DN160 and DN200: <br />( ) AQUAFIN-PP-W110-24, AQUAFIN-PP-W-110-24, <br />AQUAFIN-PP-W110-24 <br />( ) AQUAFIN-PP-W160-24, AQUAFIN-PP-W160-30, AQUAFIN-PP-W160-36 <br />( ) AQUAFIN-PP-W200-24, AQUAFIN-PP-W200-30, AQUAFIN-PP-W200-36 <br />Material consumption: 1 pcs. per intersection</p> <p>1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 29</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.7.2</p> <p>Waterproofing of pipe penetrations with <br />cementitious coated pipe penetrations <br />(AQUAFIN-PP)</p> <p>..............................</p> <p>Total 1.1.7</p> <p>Waterproofing of pipe penetrations</p> <p>..............................</p> <p>Total 1.1</p> <p>Waterproofing of building components made from concrete <br />(waterproof concrete)</p> <p>..............................</p> <p>Total 1</p> <p>Building Waterproofing</p> <p>..............................</p> <p>Unit price EURO Total amount EURO</p> <p>Page 30</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Compilation</p> <p>1</p> <p>Building Waterproofing</p> <p>..............................</p> <p>Sum total for composition:</p> <p>..............................</p> <p>Sum total, net:</p> <p>..............................</p> <p>Plus 19% VAT:</p> <p>..............................</p> <p>Sum total incl. VAT:</p> <p>..............................</p> <p>Sum total <br />EURO</p>
