24_Additional_technical_information_Laying_recommendations_for_ceramic_tiles_porcelain_tiles_up_to_60x60 cm_EN_2326_(1).pdf
1 页码
547.6 KB
Download
<h1>24_Additional_technical_information_Laying_recommendations_for_ceramic_tiles_porcelain_tiles_up_to_60x60 cm_EN_2326_(1).pdf</h1> <p>SCHOMBURG GmbH <br />Aquafinstraße 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>Additional technical information no. 24</p> <p>FLOOR and more raised floor <br />from <br />Lindner AG <br />Bahnhofstraße 29 <br />94424 Arnstorf</p> <p>Laying recommendations for ceramic tiles / <br />porcelain tiles up to 60 × 60 cm (at least 10 mm thick) <br />Bearer plate <br />(minimum nominal thickness 40 mm and triple toothing)</p> <p>FLOOR and more, FLOOR and more comfort</p> <p>Preparation of the substrate</p> <p>Cleaning polish / vacuum cleaning</p> <p>Priming</p> <p>ASO-Unigrund-PLUS, 1:1</p> <p>Levelling <br />(If required)</p> <p>ASO-PG <br />SOLOPLAN-30-CA</p> <p>Waterproofing <br />(If required)</p> <p>SANIFIN-EKB, AQUAFIN-RS300</p> <p>Bedding mortar</p> <p>MONOFLEX-S2</p> <p>Grouting</p> <p>CRISTALLFUGE-FLEX, CRISTALLFUGE-EPOX</p> <p>Notes: <br />Care must be taken to ensure that the tiles are laid with <br />minimal voids; if necessary, the buttering/floating method <br />should be used. <br />When using tile sizes larger than 60 × 60 cm, consultation <br />with the Technical Service department at SCHOMBURG <br />GmbH and the Product Management team of the Flooring <br />Division at Lindner AG is required.</p> <p>This installation proposal is subject to final approval by <br />the client and/or the design engineer, as well as the <br />contractor’s on-site assessment. The information in the <br />current technical data sheets of the listed products must be <br />observed during processing. These documents—including <br />test certificates and safety data sheets, if required—are <br />available at www.schomburg.com</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the <br />case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not <br />release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />23/26 RM/Tet/KK</p>
