21_Additional-technical-information_LargeFormat_EN_0226.pdf
1 页码
549.2 KB
Download
<h1>21_Additional-technical-information_LargeFormat_EN_0226.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Additional Technical Information No. 21</p> <p>Recommendations for laying large-format tiles <br />and boards indoors <br />Tile formats <br />Labelling <br />after DIN EN 12004</p> <p>Tile adhesive</p> <p>≤ 60 cm × 60 cm</p> <p>≤ 120 cm × 120 cm</p> <p>> 120 cm</p> <p>CRISTALLFUGE-EPOX</p> <p>R2 T</p> <p>×</p> <p>×</p> <p>×</p> <p>ASODUR®-EKF</p> <p>R2 T</p> <p>×</p> <p>×</p> <p>×</p> <p>UNIFIX®-fast</p> <p>C2 FTE S2</p> <p>×</p> <p>×</p> <p>×</p> <p>UNIFIX®-S3</p> <p>C2 TE S2</p> <p>×</p> <p>×</p> <p>×</p> <p>MONOFLEX-S2</p> <p>C2 E S2</p> <p>×</p> <p>×</p> <p>×</p> <p>MONOFLEX-XL</p> <p>C2 TE S1</p> <p>×</p> <p>×</p> <p>‒</p> <p>MONOFLEX</p> <p>C2 TE S1</p> <p>×</p> <p>×</p> <p>‒</p> <p>MONOFLEX-white</p> <p>C2 TE S1</p> <p>×</p> <p>×</p> <p>‒</p> <p>MONOFLEX-fast</p> <p>C2 FTE S1</p> <p>×</p> <p>×</p> <p>‒</p> <p>®</p> <p>LIGHTFLEX</p> <p>C2 TE S1</p> <p>×</p> <p>×</p> <p>‒</p> <p>CRISTALLIT®-FLEX-max</p> <p>C2 FE S1</p> <p>×</p> <p>×</p> <p>‒</p> <p>SOLOFLEX</p> <p>C2 TE</p> <p>×</p> <p>‒</p> <p>‒</p> <p>SOLOFLEX-FAST</p> <p>C2 FTE</p> <p>×</p> <p>‒</p> <p>‒</p> <p>®-FLEX</p> <p>CRISTALLIT</p> <p>C2 FTE</p> <p>×</p> <p>‒</p> <p>‒</p> <p>AK7P</p> <p>C2 TE</p> <p>×</p> <p>‒</p> <p>‒</p> <p>CARO-FK-FLEX</p> <p>C2 TE</p> <p>×</p> <p>‒</p> <p>‒</p> <p>For sizes larger than 50 × 50 cm, the back of the tiles or boards should <br />be coated with a contact layer; the break-out should always be checked. <br />If this contact coat is not adequate to fully cover the rear of the tile, <br />then use the floating buttering method. By achieving sufficient bonding <br />between the laying material and the substrate, any stresses that occur <br />can be absorbed evenly. Deformable or, even better, highly deformable <br />adhesives are able to relieve stresses that occur. The specific properties <br />of tiles and boards must be taken into account.</p> <p>× = suitable <br />‒ = not suitable</p> <p>Please note: DIN 18157 Part 1, ZDB Information Sheet LARGE <br />FORMATS November 2022, Technical Information MEGA FORMATS <br />November 2022.</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It <br />is the user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. <br />Always check our website for the most current valid version under www.schomburg.com. <br />02/26 RM/KK</p>
