12_1_Additional_technical_information_Installation_recommendation_for_the_Warmup_electric_thin-bed_heating_system_EN_3826.pdf
1 页码
637.5 KB
Download
<h1>12_1_Additional_technical_information_Installation_recommendation_for_the_Warmup_electric_thin-bed_heating_system_EN_3826.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Additional technical information no. 12.1</p> <p>Installation recommendation for the <br />Warmup electric thin-bed heating system <br />Manufacturer: <br />Warmup Plc Heizsysteme <br />Germany subsidiary <br />Ottostraße 3 · 27793 Wildeshausen (Germany) <br />Telephone: <br />+ 49 4431 948 180 <br />Fax: <br />+ 49 4431 948 188 <br />Technical hotline: 008000 345 00 00 <br />www.warmupdeutschland.de <br />Preliminary remarks: <br />These installation instructions apply to the Warmup PFM <br />and DWS heating systems. The instructions provided by <br />the heating system manufacturer must be observed. <br />Substrate: <br />The substrate must be dry, load-bearing, firm, grippy <br />and free of substances that act as a separating layer. <br />The substrate must correspond to the load-bearing <br />capacities in accordance with DIN 1055. Suitable <br />measures, such as blasting or milling, should be <br />implemented to remove separating layers, laitance layers <br />and the like.</p> <p>Application: <br />1. Prepare the substrate. <br />2. Prime the screed with ASO-Unigrund. <br />3. Install the self-adhesive edge insulation strip RD-SK50. <br />4. After the primer has dried, install and fix the thin-bed <br />heater according to the manufacturer's instructions. <br />5. Apply the floor levelling compound, <br />SOLOPLAN-30-PLUS in a maximum layer thickness of <br />15 mm. Deaerate the still liquid layer with a suitable <br />spiked roller and encourage it to flow. SOLOPLAN30-PLUS can be covered with tiles and boards after <br />approx. 16 hours with layer thicknesses ≤15 mm. <br />Alternatively, the heating elements can be filled with <br />the tile laying mortars LIGHTFLEX, MONOFLEX-XL, <br />MONOFLEX-FB, MONOFLEX-S2 or <br />AQUAFIN-RS300. <br />Suitable thin-bed and flowable mortars for bonding tiles/ <br />boards are: <br />MONOFLEX, MONOFLEX-XL, MONOFLEX-fast, <br />LIGHTFLEX and MONOFLEX-S2 <br />Suitable joint compounds depending on the type and <br />quality of the laying material are: <br />CRISTALLFUGE-FLEX, CRISTALLFUGE-PLUS <br />Notes: <br />• The slow heating up of the floor heating system can be <br />started no earlier than after 7 days. <br />• The technical data sheets for the named products must <br />be observed!</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the <br />case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not <br />release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />38/26 RAc/RM/tet/KK</p>
