Folder_SCHOMBURG_ASODUR-GH-S_EN_0820.pdf
6 页数
647.1 KB
Download
<h1>Folder_SCHOMBURG_ASODUR-GH-S_EN_0820.pdf</h1> <p>Rapid casting resin <br />for interior use</p> <p>ASODUR®-GH-S <br />Rapid setting casting resin for reliably closing cracks, <br />particularly simple to apply <br />Problems Solved.</p> <p>Rapid setting silicate <br />casting resin <br />for interior use <br />ASODUR®-GH-S</p> <p>v er</p> <p>y lo</p> <p>io n</p> <p>2-component casting resin, tested low-emission, mixes <br />without tools and with very good penetration capability</p> <p>w e m is</p> <p>s</p> <p>Technical data <br />Basis <br />Mixing ratio</p> <p>Modified silicate resin, <br />2-component <br />1:1 parts by volume</p> <p>Application / <br />+5 °C to +30 °C <br />substrate temperature <br />Processing time</p> <p>approx. 15 min. at +10 °C <br />approx. 10 min. at +20 °C <br />approx. 7 min. at +30 °C</p> <p>Overcoat after</p> <p>approx. 25 min. at +20 °C</p> <p>Packaging</p> <p> × 300 ml bottle in the set <br />2 <br />6 sets in the box</p> <p>Material consumption depending on width and depth <br />rate <br />of the cracks and joints</p> <p>Application</p> <p>Mix the components</p> <p>Shake for 15 seconds</p> <p>Insert screed clamps</p> <p>Cast free of voids</p> <p>Remove excess material</p> <p>Sand with quartz sand <br />(0.1–0.6 mm)</p> <p>Areas of use <br />• ASODUR-GH-S is a particularly rapid reacting casting <br />resin for the powerful closing of cracks and joints <br />in unheated and heated cementitious screeds. <br />• It is particularly suitable for time-critical work and <br />on construction sites with no power supply. <br />Properties <br />• Suitable for crack and joint widths up to 5 mm. <br />• Ready for overcoat after just 25 minutes <br />(at +20 °C). <br />• 2-component, supplied ready for use in <br />predetermined mixing ratio. <br />• Possible to mix smaller quantities without difficulty. <br />• Mix without tools and application without waiting <br />time. <br />• Very low-emission per EMICODE EC1-PLUS. <br />• Low-odour during application, odourless after <br />hardening. <br />• Resistant to alkaline solutions, diluted acids, salt <br />solutions and many organic solvents.</p> <p>schomburg.com</p> <p>08/20 HS/Tet/KK/LiW Changes reserved. The valid issue of the corresponding technical data sheet legally applies.</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p>
