ASODUR-GBM_205751_Englisch.pdf
5 页数
914.4 KB
Download
<h1>ASODUR-GBM_205751_Englisch.pdf</h1> <p>Technical Datasheet <br />ASODUR®-GBM <br />Priming, waterproofing and mortar resin</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>205751101</p> <p>1</p> <p>KG</p> <p>Combination packs</p> <p>Transparent</p> <p>205751102</p> <p>3</p> <p>KG</p> <p>Combination packs</p> <p>Transparent</p> <p>205751103</p> <p>10</p> <p>KG</p> <p>Combination packs</p> <p>Transparent</p> <p>205751104</p> <p>18</p> <p>KG</p> <p>Combination packs</p> <p>Transparent</p> <p>Product features <br />Two component <br />Multi-functional <br />Chemically resistant <br />Low viscosity</p> <p>Advantages <br />System component for bonded waterproofing <br />Multi-functional application <br />Universally applicable</p> <p>Areas of application <br />As a primer for critical substrates <br />As a primer on absorbent and lightly sanding substrates <br />As a binder for epoxy resin levelling compounds and epoxy resin screeds</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/5</p> <p>27/07/2023</p> <p>Technical Datasheet <br />ASODUR®-GBM <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Dichte, verarbeitungsfertiges Produkt (ISO 1183-1) <br />Flexural strength (DIN EN 196-1) <br />Compressive strength <br />Tensile adhesion strength (concrete, dry until matt damp) <br />Viscosity, ready to use product [value] <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>2 component system <br />Epoxy resin <br />Liquid <br />approx. 1.09 g/cm³ <br />approx. 35 N/mm² <br />approx. 70 N/mm² <br />≥ 1.5 N/mm² <br />approx. 640 mPa*s <br />Efl</p> <p>Mixing <br />Mix ratio, component A <br />Mix ratio, component B <br />Mix ratio, addition of ASO-FF levelling / scratch coat <br />Mix ratio, addition of levelling / scratch coat quartz sand <br />Mix ratio epoxy resin mortar 11-150 mm (quartz sand Ø 0.06-3.5 mm) <br />Mix ratio epoxy resin mortar 5-30 mm (quartz sand Ø 0.06-1.5 mm) <br />Mixing time</p> <p>100 weight proportion <br />50 weight proportion <br />from 0.02 weight proportion to 0.03 weight proportion <br />1 weight proportion <br />approx. 8.3 weight proportion <br />approx. 8.3 weight proportion <br />approx. 3 minutes</p> <p>Application <br />Substrate temperature <br />Max. relative humidity <br />Pot life <br />Minimum reaction temperature <br />Mixing method, machines, tools <br />Consumption <br />Second application step after waiting time <br />Overcoat (min.) <br />Consumption per mm layer thickness (levelling and scratch coat with quartz sand) <br />Foot traffic after <br />Consumption (epoxy resin screed 11-150 mm per mm layer thickness) <br />Consumption (epoxy resin screed 5-30 mm per mm layer thickness) <br />Application temperature <br />Overcoat (max.) <br />Hardening time / full resilience</p> <p>from 10 °C to 35 °C <br />80 % <br />approx. 35 minutes <br />min. 10 °C <br />Drill with stirrer <br />approx. 0.30 - 0.50 kg/m² <br />approx. 12 hours <br />after 12 hours <br />approx. 1.6 kg/m² <br />approx. 12 hours <br />approx. 2 kg/m² <br />approx. 2 kg/m² <br />from 10 °C to 35 °C <br />to 24 hours <br />approx. 7 days</p> <p>Application technology <br />Aids/tools <br />Stirrer (approx. 300 rpm) <br />Rubber lip slider <br />Circular cage <br />Nylon fur roller (6mm) with textured polyamide cover</p> <p>Manual processing <br />distributable with rubber lip slider <br />Distributable with nylon fur roller</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/5</p> <p>27/07/2023</p> <p>Technical Datasheet <br />ASODUR®-GBM <br />Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6.</p> <p>Load-bearing <br />Firm <br />Grippy <br />Dry <br />Free of adhesion inhibiting substances <br />Protected from the effects of moisture penetration on the rear side</p> <p>Measures for substrate preparation <br />Substrate preparations must be carried out in compliance with DIN EN 14879-1:2005, 4.2 et.seq.</p> <p>Substrate quality class</p> <p>Usage <br />Mixing <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7. <br />8. <br />9.</p> <p>The (ideal) material temperature during the mixing procedure is +15 °C. <br />Add the hardener to the resin. <br />The hardener must run completely out of the container. <br />Mix thoroughly with the mixer until a homogeneous consistency. <br />The hardener must be distributed evenly. <br />The mixing time is ca. 3 minutes. <br />Decant the mass into a clean bucket. <br />Stir meticulously again. <br />If aggregates (e.g. quartz sand) are mixed in, make sure that these also have a material temperature of approx. +15 °C.</p> <p>Production and application of levelling compound/scratch coat material: <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7.</p> <p>Prime the substrate with ASODUR®-GBM. <br />The quartz sand (Ø 0.1-0.6 mm) is mixed into the previously homogeneously mixed and re-potted resin and hardener component (mix ratio 1:1). <br />Mix the liquid and solid components evenly. <br />For levelling/scratch coats on vertical and sloping surfaces, we recommend the addition of 2-3% wt. ASO®-FF. <br />Apply the mixed levelling/scratch coat in a single application step using the scratch filler method. <br />Sprinkle the still fresh levelling/scratch coat with quartz sand (Ø 0.1 - 0.6 mm). <br />Consumption of mixture for scratch coat approx. 1.6 kg/m² per mm layer thickness</p> <p>Producing and application of the epoxy resin screed (layer thickness from 11 to 150 mm) <br />1. <br />2. <br />3. <br />4. <br />5. <br />6.</p> <p>Add the quartz sand (Ø 0.06 - 3.5 mm) in the correct quantity (3:25) to the forced paddle mixer (e.g. type: Zyklos or UEZ). <br />Then add the mixed resin mixture. <br />Mix the liquid and solid components evenly. <br />Prime ASODUR®-GBM using the roller method. <br />Consumption approx. 0.3 kg/m² <br />The mixed screed is applied to the still fresh primer in a layer thickness of at least approx. 5 mm, drawn off with gauges and mechanically <br />smoothed. <br />7. Consumption of screed mix approx. 2 kg/m² per mm layer thickness</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/5</p> <p>27/07/2023</p> <p>Technical Datasheet <br />ASODUR®-GBM <br />Producing and applying epoxy mortar as a levelling and coving mortar <br />1. <br />2. <br />3. <br />4.</p> <p>Stir the quartz sand (Ø 0.06-1.5 mm) homogeneously into the mixed ASODUR®-GBM in a mix ratio of 3:25. <br />Prime the substrate with ASODUR®-GBM. <br />Apply the mortar while still wet using trowel techniques, ensuring even compaction. <br />Observe the minimum film thickness of 3 mm.</p> <p>Epoxy resin coating <br />1. Apply the screed with gauge rakes and smooth mechanically (use a blade or finishing trowel). <br />2. Apply the mixed screed to the primed surface in a minimum film thickness of approx. 3 mm.</p> <p>Cleaning tools <br />Immediately after use, clean tools with ASO-R001.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 10 - 25 °C for 18 months in the original canister. Promptly use opened canister.</p> <p>Disposal <br />Product leftovers can be disposed of in accordance with disposal code AVV 08 04 09 and AVV 08 01 11. <br />Hardened product leftovers can be disposed of in accordance with disposal code AVV 15 01 06.</p> <p>Notes <br />The indicated consumption quantities are calculated values without additions for textured surface roughness and absorbency, level <br />compensation, and residual material in the canister. We always recommend a calculated safety addition of 10% on top of the calculated <br />consumption quantities. <br />Higher temperatures shorten the pot life. Lower temperatures increase the application and hardening times. The rate at which material is <br />consumed also increases at lower temperatures. <br />The bonding between the individual layers can be strongly disrupted between the individual application steps due to the effects of dampness <br />and contamination. Coating work requires a substrate temperature of at least 3 °C above the dew point temperature. <br />If longer waiting times arise between the individual application steps or surfaces that have already been treated with liquid resin are coated <br />again after an extended waiting time, the old surface must be well cleaned and thoroughly ground. Then apply a complete pore-free new <br />coating. <br />Arrange for proper ventilation during the drying and hardening phases. <br />Synthetic resin products and surface protection systems must be protected from moisture (e.g. rain or condensation water) for approx. 4-6 <br />hours after application. Moisture causes a white colour and/or stickiness on the surface and can cause problems during hardening. <br />Discoloured and/or sticky surfaces must be removed and reworked, e.g. through grinding or shot blasting. <br />For vertical surfaces use ASODUR®-GBM with the addition of ASO®-FF. <br />Observe the technical data sheets of the products mentioned before starting work. <br />Applications that have not been clearly mentioned in this technical data sheet may only be carried out after the technical service department <br />of SCHOMBURG GmbH has been consulted, and after the said department has approved of such a course of action in writing. <br />For detailed information on application, read and observe supplementary technical information no. 19 "Applying ASODUR® products".</p> <p>The recognised standards of construction engineering, the relevant guidelines and current regulations <br />must be observed. <br />Observe applicable safety data sheet! <br />GISCODE: RE 30</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/5</p> <p>27/07/2023</p> <p>Technical Datasheet <br />ASODUR®-GBM <br />Annotations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />5/5</p> <p>27/07/2023</p>
