ASO-Unigrund-K_Product_Information_GB_4915.pdf
2 页数
239.7 KB
Download
<h1>ASO-Unigrund-K_Product_Information_GB_4915.pdf</h1> <p>Product information <br />Primers</p> <p>ASO®-Unigrund-K <br />Concentrated primer</p> <p>Technical Data: <br />Basis: acrylate dispersion <br />Mixing ratio: 1:3 to 1:6 with water <br />Application/ <br />substrate temperature: </p> <p>+5°C to +30 °C</p> <p>Consumption: </p> <p>approx. 30 - 80 g/m2</p> <p>Packaging: </p> <p>1, 5, 10, 25, 210 litre containers</p> <p>TS/CoS/JD</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone +49-5231-953-00 <br />fax <br />+49-5231-953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>49/15</p> <p>Areas of application: <br />• ASO®-Unigrund-K reduces the absorption of substrates, binds <br />surface dust, consolidates, prevents rapid water loss from <br />levelling compounds. <br />• ASO®-Unigrund-K is used for priming absorbent and lightly <br />sanded substrates e.g. gypsum-based construction materials <br />(plaster, interlocking gypsum slabs, boards, screeds), concrete, <br />masonry work and similar. <br />• ASO®-Unigrund-K is suitable as an adhesion promoter for <br />surface applied waterproof membranes (e.g. SANIFLEX, <br />AQUAFIN®-2K/M), thin-bed adhesives as well as wall and <br />floor levelling compounds such as SOLOCRET®-50, <br />SOLOPLAN®-30 and ASO®-NM15. It is also suitable for <br />exterior use.</p> <p>Subject to changes. Consult current technical data sheet for most recent information.</p> <p>* at +20 °C and 65 % relative humidity</p> <p>2 05535</p> <p>Product preparation: <br />ASO®-Unigrund-K is diluted 1:3 to 1:6 with water dependent on the <br />substrate condition, the application involved and the absorption. Beneath <br />wall and floor levelling compounds use at a mix ratio of 1:3 with water. <br />Application is with a paint brush, brush or a fine-pored sponge roller but it <br />can also be sprayed with suitable equipment. Avoid applying too thickly or <br />forming puddles. ASO®-Unigrund-K must be fully dry before further work <br />can be carried out on the primed surface.</p> <p>ASO®-Unigrund-K <br />Concentrated primer</p> <p>Properties: <br />• Concentrate, highly dilutable <br />• Rapid drying <br />• Universal application <br />• Resistant to water and alkalis <br />• Low emission <br />• Solvent free <br />• For interior and exterior use</p> <p>Application: <br />The substrate must be load-bearing, clean, dry and free from materials, <br />which will impede adhesion. Flow screeds must be abraded and <br />vacuumed. Remove unstable or weakly bonded layers e.g. release agents, <br />residues of old adhesive, levelling layers, surface finishes and paints, by <br />mechanical scrubbing, planing, scabbling or shot-blasting.</p> <p>Degree of dilution <br />(parts by weight <br />ASO®-Unigrund-K : parts by <br />weight water) <br />Smooth, dense substrates such as concrete <br />1 : 3 <br />sections, highly compacted cement-based <br />screeds as well as consolidating slightly <br />sanded substrates in interior areas <br />Substrates with a gypsum binder (gypsum <br />1 : 3 <br />planks, gypsum plaster, moisture resistant <br />plasterboard, gypsum fibreboard, calcium <br />sulphate screeds)* <br />Dust binding and regulation of the <br />1 : 4 bis 1 : 6 <br />absorption of porous, highly absorbent <br />(dependent on the absorption <br />substrates (cement-based screeds, concrete, of the substrate) <br />cement-based and lime-cement-based <br />plasters/renders) in interior and exterior <br />areas</p> <p>1 Load-bearing wall substrate</p> <p>2 Cleaning the wall substrate</p> <p>3 Load-bearing floor substrate</p> <p>4 Cleaning the floor substrate</p> <p>5 ASO®-Unigrund-K, suitable tools</p> <p>6 Dilution of ASO®-Unigrund-K dependent <br />on the absorption of the substrate</p> <p>7 Priming the wall substrate</p> <p>8 Priming the floor substrate</p> <p>Areas of use/application</p> <p>v er</p> <p>y lo</p> <p>io n</p> <p>* Consult the technical data sheet regarding the installation of large format tiles!</p> <p>w e m is</p> <p>s</p> <p>9 Completed primed substrate <br />Information about the emission level of volatile compounds in indoor <br />air, which pose a health risk by inhalation, on a scale from class A+ <br />(very low emissions) to C (high emissions).</p>
