AQUAFIN-TC07_204212_Englisch.pdf
4 页数
572.9 KB
Download
<h1>AQUAFIN-TC07_204212_Englisch.pdf</h1> <p>Technical Datasheet <br />AQUAFIN®-TC07 <br />Flexible 2 component sealing mortar</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>204212001</p> <p>30</p> <p>KG</p> <p>Set</p> <p>light grey</p> <p>Product features <br />resistant to concrete-damaging water, in accordance with DIN 4030 <br />Hydraulic setting</p> <p>Advantages <br />Resistant to frost, de-icing salts, UV and ageing <br />Highly resistant to wear and abrasion <br />Can be applied by brush, spatula and spray <br />Watertight up to 5 bar <br />easy and economical application <br />Adheres to matt damp substrates without primers <br />Vapour permeable</p> <p>Fields of application / waterproofing <br />As a waterproof protective coating <br />On concrete, masonry work, plaster or screed <br />For substrates that are subsequently not subject to cracking without pronounced movement <br />For positive and negative water pressure <br />For interior and exterior use</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>20/09/2023</p> <p>Technical Datasheet <br />AQUAFIN®-TC07 <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Density, ready to use product (ISO 1183-1) <br />Crack bridging PG MDS / FPD <br />Compressive strength (7 days) <br />Compressive strength (14 days) <br />Compressive strength (28 days) <br />Tensile adhesion strength DIN EN 1542</p> <p>2 component system <br />Polymer-mortar combination <br />Filler consistency <br />approx. 2 kg/dm³ <br />to 0.1 mm <br />approx. 18 N/mm² <br />approx. 21 N/mm² <br />approx. 25 N/mm² <br />≥ 1 N/mm²</p> <p>Mixing <br />Mix ratio, component A <br />Mix ratio, component B <br />Mixing time</p> <p>4 weight proportion <br />1 weight proportion <br />approx. 3 minutes</p> <p>Application <br />Substrate/application temperature <br />Method of application, max. layer thickness per application step <br />Second application step after waiting time <br />Foot traffic after <br />Pot life <br />Pressurised water resilient after</p> <p>from 5 °C to 30 °C <br />to 1 mm <br />approx. 4 - 6 hours <br />approx. 24 hours <br />approx. 30 - 45 minutes <br />≥ 7 days</p> <p>Material consumption <br />Material consumption rate according to the area of application</p> <p>Application technology <br />Aids/tools <br />Stirrer (approx. 500-700 rpm) <br />Suitable mixing paddle <br />Trowel <br />Serrated or layer-thickness trowel <br />Flat trowel <br />Brush <br />Spray equipment</p> <p>Manual processing <br />Can be trowelled off <br />Applicable with a brush</p> <p>Machine application <br />AQUAFIN®-TC07 can be mechanically applied. For precise information, see the additional Technical Information No. 43.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>20/09/2023</p> <p>Technical Datasheet <br />AQUAFIN®-TC07 <br />Suitable substrate <br />Cement plaster <br />Masonry work <br />Concrete <br />Cement screed (CT)</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6.</p> <p>Frost-free <br />Load-bearing <br />Even <br />Pore open <br />Sealed in the surface <br />Free of adhesion inhibiting substances</p> <p>Preparing the details <br />1. Depressions > 5 mm and mortar pockets, plaster grooves in brickwork, open butt or bed joints, damaged areas, large pored substrates or <br />uneven masonry work must be levelled in advance with ASOCRET-M30 (cement-based mortar). <br />2. Dips < 5 mm should be levelled with ASOCRET-M30.</p> <p>Preparing the surface <br />2. Pre-moisten the dry substrate so that it is matt damp at the time of application. <br />3. Extremely absorbent and slightly sandy substrates must be primed with ASO-Unigrund-GE or ASO-Unigrund-K.</p> <p>Pipe penetrations <br />For the watertight formation of pipe penetrations, the system components of the ASO-Joint-Sleeves are to be used in accordance with their <br />technical data sheets.</p> <p>Usage <br />Mixing <br />1. Fill approx. 80% of the liquid component into a clean mixing bucket and mix with the powder component to produce a homogeneous, lump-free <br />mass. <br />2. Pre-mix for approx. 3 minutes. <br />3. Finally, add the rest of the liquid component and mix sufficiently. <br />4. Additional water addition is not permitted.</p> <p>Waterproofing <br />1. Apply AQUAFIN®-TC07 in a minimum of two application steps ensuring it is free of pores. <br />2. The second application step (and those following) may be completed once the first application step cannot be damaged (4–6 hrs, depending <br />on the ambient conditions). <br />3. An application thickness of more than 2 kg/m² in one application step can lead to cracking.</p> <p>Movement and connecting joints <br />For watertight formation of moving and connecting joints, use ASO-Joint-Sealing Tape system components in accordance with their technical <br />data sheets.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 5 - 40 °C for 12 months in the original canister. Promptly use opened canister.</p> <p>Disposal <br />Product leftovers can be disposed of in accordance with disposal code AVV 17 01 07.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>20/09/2023</p> <p>Technical Datasheet <br />AQUAFIN®-TC07 <br />Notes <br />Protect surfaces that are not to be treated from the effects of AQUAFIN®-TC07! <br />The waterproofing must not be affected by water while it is binding. The effect of water from behind can lead to spalling in case of frost. <br />In case of strong sunlight, work against the movement of the sun in shaded areas. <br />In rooms with high humidity and/or insufficient ventilation (e.g. water containers), dropping below the dew point (condensation formation) <br />may occur on the surface. This must be avoided by taking suitable measures such as by using condensation dryers. Direct heating or <br />uncontrolled blowing warm air is not permissible. <br />AQUAFIN®-TC07 may not be subjected to punctiform or linear loads as the surface coating. <br />Direct contact with metals such as copper, zinc, and aluminium must be avoided by means of a pore sealed primer. A pore sealed primer is <br />produced via 2 application steps using ASODUR®-GBM (see technical data sheet). <br />On PVC, gunmetal, and stainless steel flanges, ASO® joint sleeves or alternatively ADF® pipe gaskets must be installed without voids or <br />wrinkles and integrated seamlessly into the waterproofing. <br />Protect the fresh coating from rain, wind, frost and direct sunlight. <br />In the service water tanks, temperatures around +10 °C to +15 °C are usually expected. In order to ensure complete hydration of the <br />cement, the coating is kept damp for a sufficiently long period (constant relative humidity of > 80%) and protected against drying. 7 days are <br />generally sufficient for this. <br />At high temperatures, the surface may be slightly sticky. In this case, we recommend curing with water to ensure complete hydration. <br />No water may be added to AQUAFIN®-TC07. <br />AQUAFIN®-TC07 is suitable for bridging minor static shrinkage or hairline cracks up to 0.1 mm. It is not suitable for bridging larger or nonstatic cracks.</p> <p>GISCODE: ZP1 (Komponente A), D1 (Komponente B)</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>20/09/2023</p>
