Folder_AQUAFIN-2KM-PLUS_EN_1021.pdf
6 页数
918.4 KB
Download
<h1>Folder_AQUAFIN-2KM-PLUS_EN_1021.pdf</h1> <p>Cementitious waterproofing slurry</p> <p>AQUAFIN®-2K/M-PLUS <br />Crack-bridging, cementitious waterproofing slurry <br />with optimum working characteristics. <br />Problems Solved.</p> <p>Cementitious <br />waterproofing slurry <br />AQUAFIN®-2K/M-PLUS <br />AQUAFIN-2K/M-PLUS is a new development based on <br />many years of experience. It stands for reliable and proven <br />safety with outstanding processing properties. <br />The two-component waterproofing slurry is crack-bridging <br />and is used for waterproofing of buildings in accordance <br />with DIN 18533 and DIN 18535 as well as when sealing <br />in combination in accordance with DIN 18531, <br />DIN 18534, DIN 18535 and DIN EN 14891.</p> <p>SCHOMBURG <br />GmbH & Co. KG <br />Detmold</p> <p>P-1200/906/17 <br />P-1200/907/17 <br />MPA <br />Braunschweig</p> <p>* Informationen über das Emissionsniveau von flüchtigen Stoffen in der <br />Raumluft, die bei Inhalation Gesundheitsrisiken, auf einer Skala von <br />Klasse A + (sehr emissionsarm) bis C (hohe Emissionen), darstellen.</p> <p>Technical data <br />Basis</p> <p>Polymeric dispersion (liquid <br />component), sand/cement, additives <br />(powder component)</p> <p>Processing / <br />+5°C to +30°C <br />substrate temperature <br />Pot life*</p> <p>approx. 60 minutes</p> <p>Ready for further <br />processing*</p> <p>after approx. 3–6 hours</p> <p>Processing</p> <p>Hand, machine</p> <p>Material <br />consumption**</p> <p>3.5 kg / m2 / 2 mm <br />5.3 kg / m2 / 3 mm</p> <p>Packaging</p> <p>21 kg combination container, <br />7 kg and 35 kg container unit</p> <p>* at +23 °C and 50 % rel. humidity <br />** dry film thickness</p> <p>Areas of application <br />· Below-ground waterproofing, plinth waterproofing, <br />transverse waterproofing in and under walls according <br />to DIN 18533. <br />· Subsequent waterproofing according to <br />WTA datasheet 4-6. <br />· Waterproofing in combination in accordance with tiles <br />and panels according to DIN 18531, DIN 18534, <br />DIN 18535 and DIN EN 14891. <br />· For outdoor areas as waterproofing on balconies, <br />loggias etc. according to DIN 18531. <br />· Waterproofing containers and tanks according to <br />DIN 18535. <br />Properties <br />· Two-component. <br />· Without seams or joints. <br />· Flexible and crack-bridging. <br />· Suitable for all load-bearing, conventional substrates. <br />· Bonding on damp substrates without primers. <br />· Vapour-permeable, resistant to frost, UV, and ageing. <br />· Resistant to de-icing salt. <br />· For interior and exterior use. <br />· Waterproofing. <br />· Sealing in combination (AIV). <br />· Resistant to concrete-damaging water according to <br />DIN 4030.</p> <p>schomburg.com</p> <p>Improved processing <br />properties. The classic slurry <br />for safe waterproofing at the <br />construction site. <br />The “PLUS” stands for further development of <br />AQUAFIN-2K/M for even better processing properties <br />and continues to provide safe seals. If a classic flexible <br />waterproofing slurry is required, there is no alternative to <br />AQUAFIN-2K/M-PLUS. This product is the result of <br />50 years of expertise with two-component cementitious <br />waterproofing slurries.</p> <p>Long <br />workability <br />60 minutes</p> <p>Smooth <br />application <br />Very convenient</p> <p>Flexible <br />application <br />Hand and machine</p> <p>Subject to change. Users must always refer to the most recent issue of the respective applicable technical data sheet for the product concerned. <br />10/21 MSt/TAN/LiW</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D -32760 Detmold (Germany) <br />phone + 49 - 52 31- 953 - 00 <br />fax <br />+ 49 - 52 31- 953 -108 <br />email export@schomburg.de <br />www.schomburg.com</p>
