34_TZI_Setup recommendation in connection with application for SKINROCK_EN_3618.pdf
1 页码
70.5 KB
Download
<h1>34_TZI_Setup recommendation in connection with application for SKINROCK_EN_3618.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Additional Technical Information No. 34</p> <p>Set up recommendation in connection with <br />application for SKINROCK Laminate Natural stone tiles <br />For expansion <br />and connection <br />joints</p> <p>Notes on: <br />Substrate preparation</p> <p>Priming with</p> <p>Adhesion with</p> <p>Adhesion with</p> <p>Plaster PG II-III acc. to DIN 18550</p> <p>Remove Plaster excess (overhang)</p> <p>ASO®-Unigrund</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Brickwork acc. to DIN 1053, <br />part 1</p> <p>Brickwork planar and joint full. For <br />mixed masonry is a suitable plaster of <br />15mm thickness required. Brickwork <br />made of binding agent stone work <br />has to be atleast 6 months old.</p> <p>ASO®-Unigrund</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Concrete acc. to DIN 1045, <br />of atleast 6 months old</p> <p>Sinter layers to be removed by shot <br />blasting or high pressure cleaner.</p> <p>ASO®-Unigrund</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Dry wall panels/boards, eg: <br />gypsum board acc. to <br />DIN 18181, gypsum fibre <br />reinforced polystyrene</p> <p>To be made suitable also as substrate <br />for tile laying.</p> <p>ASO®-Unigrund</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Ceramic covering/coatings, <br />Natural and artificial stone <br />bonded, stable</p> <p>Cleaning and degreasing and if <br />required also sanding.</p> <p>ASO®-Unigrund-S or <br />scratch coat with <br />AQUAFIN®-RS300</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Paints and coats, bonded and <br />stable</p> <p>Remove dispersion paint,lacquers <br />or oil colours to be sanded. We <br />recommend testing of adhesion first. <br />Rising dampness out of the substrate <br />is to be avoided.</p> <p>ASO®-Unigrund-S or <br />scratch coat with <br />AQUAFIN®-RS300</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Contact trowel <br />application with <br />UNIFIX®-S3-fast</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Substrate/Application <br />Wall surface Interior</p> <p>Polystyrene, eg. tub supports</p> <p>Wooden substrate stable eg: <br />Chip boards on rigid wooden <br />support frame work</p> <p>If necessary to be re-tightend. The <br />floor boards should go through a <br />suitability test.</p> <p>ASO®-Unigrund-S, <br />STEPBOARD 9 or <br />15 mm to be layed <br />or in advance to be <br />planked with gypsum <br />board and butt joints to <br />be filled.</p> <p>Type N with BENFER JOLLY <br />Type S with UNIFIX®-S3-fast</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>Wooden substrate stable eg: <br />Chip boards on rigid wooden <br />support frame work</p> <p>Cleaining and Degreasing</p> <p>–</p> <p>BENFER JOLLY</p> <p>special dispersion <br />joint</p> <p>ESCOSIL®-2000-ST</p> <p>For damp and wet areas and in general before the laying of SKINROCK tiles waterproofing methods should be installed. <br />Please adhere to the Technical Data Sheets for the above mentioned products. <br />The recommendations do not replace any technical application advice!</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It <br />is the user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. <br />Always check our website for the most current valid version under www.schomburg.com. <br />1/1</p> <p>36/18</p>
