22_TZI_ReingFliesenb_GB_1215.pdf
1 页码
44.1 KB
Download
<h1>22_TZI_ReingFliesenb_GB_1215.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Additional Technical Information No. 22</p> <p>Cleaning recommendations for tiled finishes <br />Grouts</p> <p>Removal of cementitious or <br />epoxy resin films</p> <p>General cleaning</p> <p>Mineral-based grouts: <br />ASO-Fugenbunt <br />ASO-Flexfuge <br />ASO-Fugenbunt <br />ASO-Fugenbreit <br />CRISTALLFUGE <br />HF05-Brillantfuge</p> <p>We recommend alternating with alkaline <br />and acidic cleaners to clean the tile surface. <br />Pre-wet the joints and then apply the cleaning <br />material or cleaning solution (dependent <br />on the manufacturer’s instructions). Keep the <br />contact time of the cleaner to a minimum. <br />Afterwards wash the tiled finish with plenty of <br />clean water.</p> <p>For regular care and cleaning of the grouted <br />area, use neutral or slightly alkaline cleaning <br />materials at the prescribed application <br />concentration. Following cleaning, rinse the <br />area with clean water. If using acid cleaners, <br />follow the appropriate instructions. Take <br />account of the specific properties of the <br />tiled finish. Pre-wet the joints then apply the <br />cleaning material at manufacturer’s prescribed <br />application concentration. Keep the contact <br />time of the cleaner to a minimum; then wash <br />with plenty of clean water. Acidic cleaners <br />can affect the strength of the grout or even <br />lead to complete destruction of the grout <br />matrix when used incorrectly such as e.g. too <br />high a dosage, too long in contact or a lack <br />of pre-wetting of the joints.</p> <p>Epoxy resin grouts: <br />ASODUR-EK98 <br />ASODUR-Design</p> <p>Light epoxy hazes can be present on the tile <br />surface due to site influences. These can be <br />removed from the hardened joint/finish by <br />using ASODUR-Cleanser or other suitable <br />epoxy resin cleaners (follow manufacturer’s <br />instructions). In order to prevent damage to <br />the grout, only remove emulsified epoxy resin <br />hazes after 16 hours at the earliest. Then <br />wash down the tiled finish with plenty of clean <br />water.</p> <p>Alkaline, acidic or neutral cleaning materials, <br />which are suitable for cleaning ceramic tiled <br />finishes, can be used. Apply the cleaning <br />materials are per manufacturer’s instructions.</p> <p>Take note of the specific properties of the material installed. Refer to the information in the current technical data sheets for the itemised products when using. <br />These are available at www.schomburg.com together with test certificates and safety data sheets on request.</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It <br />is the user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. <br />Always check our website for the most current valid version under www.schomburg.com. <br />12/15 RM/CoS/JD</p>
