Aquafin-RS300_DoP_GB.pdf
2 Pages
69 Ko
Download
<h1>Aquafin-RS300_DoP_GB.pdf</h1> <p>Declaration of Performance <br />according Annex III oft he Regulation (EU) No. 305/2011</p> <p>for the product</p> <p>AQUAFIN-RS300 <br />204208 <br />1.</p> <p>Unique identification code of the product type:</p> <p>EN 14891 CM</p> <p>2. Identification :</p> <p>batch no.: see packaging of the product</p> <p>3. Intended use:</p> <p>Liquid applied cement based waterproofing <br />product for use under ceramic tiles in <br />exterior areas</p> <p>4. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>5. Authorized representative:</p> <p>not relevant</p> <p>6. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System3</p> <p>7. Notified test laboratory:</p> <p>The notified testing laboratory <br />KIWA Bautest Dresden, <br />identification number 2007 <br />performed the determination of the producttype on the basis of type testing under <br />system 3 and issued: test report No <br />P-DD 4534/01/2010B. <br />The notified testing laboratory <br />KIWA Polymer Institut, <br />identification number 1119 <br />performed the determination of the producttype on the basis of type testing under <br />system 3 and issued: test report No <br />P- 8599-2.</p> <p>8. Declared performance : <br />Essential characteristic</p> <p>Performance</p> <p>Harmonised <br />technical specification</p> <p>2</p> <p>Initial adhesive tensile strength <br />Tensile adhesion strength after water <br />immersion <br />Tensile adhesion strength after heat ageing <br />Tensile adhesion strength after freeze-thaw <br />cycles</p> <p>≥ 0,5 N/mm <br />2 <br />≥ 0,5 N/mm</p> <p>Adhesive tensile strength after contact with <br />lime water</p> <p>≥ 0,5 N/mm</p> <p>2</p> <p>≥ 0,5 N/mm</p> <p>2</p> <p>≥ 0,5 N/mm</p> <p>2</p> <p>EN 14891:2012</p> <p>Essential characteristic <br />Water impermeability <br />Crack bridging <br />Dangerous ingredients</p> <p>Performance</p> <p>Harmonised <br />technical specification</p> <p>No water penetration <br />≥ 0,75 mm <br />NPD</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4. <br />Signed for and on behalf of the manufacturer by: <br />Wilhelm-Kreyling Dreyer, technician <br />(name and function)</p> <p>Detmold, 11.02.2014</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>http://www.schomburg.de/en/Materials_Safety_Data_Sheet_MSDS-datenblaetter.html <br />or <br />http://www.schomburg.de/en/Technical_Data_Sheet-datenblaetter.html</p>
