Declaration of Performance according Annex III of the Regulation (EU) No. 305/2011
for the product
AQUAFIN-P4 205091
1.
Unique identification code of the product type:
2. Identification :
EN 1504-5 : U(D1) W(1) (6/40) batch no.: see packaging of the product
3. Intended use:
4. Manufacturer :
Schomburg GmbH & Co. KG Aquafinstrasse 2-8 32760 Detmold
5. Authorized representative:
not relevant
6. System or systems of assessment and verification of constancy of performance of the construction product as:
System 4
7. Notified test laboratory:
8. Declared performance :
Essential characteristic Adhesion and Extensibility of extensible crack filler Water tightness Glass transition temperature Injection capacity with dry medium Injection capacity with not dry medium viscosity
Period of workability Compatibility with concrete
Performance
Harmonised technical specification
≥ 0,1 N/mm² ≥ 10 % D1 - 25°C Injection class: 0,1 bei 6°C, 21°C and 30°C Injection class: 0,1 bei 6°C, 21°C and 30°C Tmin: 6°C 288 mPa*s Tnorm: 21°C 148 mPa*s Tmax: 40°C 95 mPa*s T: 5°C > 40 min T: 18°C > 30 min 15,6% No failure during pressure test Loss of ability of deformation < 20%
EN 1504-5:2005
The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Michael Hölscher, technician (name and function)
Detmold, 02.05.2013
This declaration of performance was created electronically. It is valid without manual signature.
The current material safety data sheet and technical data sheet is downloadable under
http://www.schomburg.de/en/Materials_Safety_Data_Sheet_MSDS-datenblaetter.html or http://www.schomburg.de/en/Technical_Data_Sheet-datenblaetter.html