SOLOPLAN-FA_(17)EN.pdf
6 Pages
90.5 KB
Download
<h1>SOLOPLAN-FA_(17)EN.pdf</h1> <p>42.0</p> <p>Page 1/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 17.05.2016 <br />*</p> <p>Version number 17</p> <p>Revision: 17.05.2016</p> <p>SECTION 1: Identification of the substance/mixture and of the company/undertaking <br />· 1.1 Product identifier <br />· Trade name: SOLOPLAN-FA <br />· Article number: 200012 <br />· 1.2 Relevant identified uses of the substance or mixture and uses advised against <br />No further relevant information available. <br />· Application of the substance / the mixture Knife filler/ Surfacer <br />· 1.3 Details of the supplier of the safety data sheet <br />· Manufacturer/Supplier: <br />SCHOMBURG GmbH & Co. KG <br />Aquafinstr. 2-8 <br />D-32760 Detmold <br />Germany <br />---------------------------------------------Tel: ++49 (0)5231/953-00 <br />Fax: ++49 (0)5231/953-123 <br />email: info@schomburg.de <br />web: www.schomburg.de <br />· Informing department: <br />Product Safety Department <br />Tel: ++49 (0)5231/953-193 <br />Fax: ++49 (0)5231/953-106 <br />email: guido.herfort@schomburg.de</p> <p>*</p> <p>SECTION 2: Hazards identification <br />· 2.1 Classification of the substance or mixture <br />· Classification according to Regulation (EC) No 1272/2008 <br />GHS05 corrosion <br />Eye Dam. 1 H318 Causes serious eye damage. <br />· 2.2 Label elements <br />· Labelling according to Regulation (EC) No 1272/2008 <br />The product is classified and labelled according to the CLP regulation. <br />· Hazard pictograms GHS05 <br />· Signal word Danger <br />· Hazard-determining components of labelling: <br />Cement, portland, chemicals <br />· Hazard statements <br />H318 Causes serious eye damage. <br />· Precautionary statements <br />P280 <br />Wear protective gloves/protective clothing/eye protection/face protection. <br />P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact <br />lenses, if present and easy to do. Continue rinsing. <br />P352 <br />Wash with plenty of water. <br />P405 <br />Store locked up. <br />P501 <br />Dispose of contents/container in accordance with local/regional/national/ <br />international regulations. <br />· 2.3 Other hazards <br />· Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />(Contd. on page 2) <br />GB</p> <p>42.0</p> <p>Page 2/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 17.05.2016</p> <p>Version number 17</p> <p>Revision: 17.05.2016</p> <p>Trade name: SOLOPLAN-FA <br />(Contd. of page 1)</p> <p>· vPvB: Not applicable. <br />*</p> <p>SECTION 3: Composition/information on ingredients <br />· 3.2 Chemical characterisation: Mixtures <br />· Description: Product based on cement and mineral filler. <br />· Dangerous components: <br />CAS: 65997-15-1 Cement, portland, chemicals <br />EINECS: 266-043-4 <br />Eye Dam. 1, H318; <br />Skin Irrit. 2, H315; STOT SE 3, H335 <br />· Additional information For the wording of the listed risk phrases refer to section 16.</p> <p>*</p> <p>2,5-10%</p> <p>SECTION 4: First aid measures <br />· 4.1 Description of first aid measures <br />· General information <br />Symptoms of poisoning may even occur after several hours; therefore medical observation for at <br />least 48 hours after the accident. <br />Personal protection for the First Aider. <br />It is possible to choke in case of vomiting in unconsciousness. <br />Bring unconscious persons into a stable position on side. <br />Keep the respiratory tract free (remove dentures and vomiting). <br />Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage <br />of breathing: artificial respiration. <br />Take up a doctor immediately! <br />· After inhalation <br />Supply fresh air or oxygen; call for doctor. <br />Carry persons out of the dust-contaminated area. <br />· After skin contact After contact, clean the skin mechanical and rinse with water and soap. <br />· After eye contact <br />Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. <br />· After swallowing <br />Drink copious amounts of water and provide fresh air. Instantly call for doctor. <br />Show the pack or the label to the doctor. <br />· 4.2 Most important symptoms and effects, both acute and delayed <br />No further relevant information available. <br />· 4.3 Indication of any immediate medical attention and special treatment needed <br />No further relevant information available.</p> <p>*</p> <p>SECTION 5: Firefighting measures <br />· 5.1 Extinguishing media <br />· Suitable extinguishing agents Use fire fighting measures that suit the environment. <br />· 5.2 Special hazards arising from the substance or mixture <br />The product formed corrosive water for fire-fighting. <br />· 5.3 Advice for firefighters <br />· Protective equipment: Wear self-contained breathing apparatus. <br />· Additional information <br />Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. <br />Follow the emergency-plan.</p> <p>*</p> <p>SECTION 6: Accidental release measures <br />· 6.1 Personal precautions, protective equipment and emergency procedures <br />Wear protective clothing. <br />Avoid eye- and skin contact. <br />(Contd. on page 3) <br />GB</p> <p>42.0</p> <p>Page 3/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 17.05.2016</p> <p>Version number 17</p> <p>Revision: 17.05.2016</p> <p>Trade name: SOLOPLAN-FA <br />(Contd. of page 2)</p> <p>Avoid causing dust. <br />Bring persons out of danger. <br />Wear protective equipment. Keep unprotected persons away. <br />· 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. <br />· 6.3 Methods and material for containment and cleaning up: <br />Pick up the product mechanically, avoid dust formation. <br />· 6.4 Reference to other sections <br />See Section 7 for information on safe handling <br />See Section 8 for information on personal protection equipment. <br />See Section 13 for information on disposal. <br />*</p> <p>SECTION 7: Handling and storage <br />· 7.1 Precautions for safe handling Keep away from children. <br />· Information about protection against explosions and fires: No special measures required. <br />· 7.2 Conditions for safe storage, including any incompatibilities <br />· Storage <br />· Requirements to be met by storerooms and containers: Protect against wetness and water. <br />· Information about storage in one common storage facility: <br />Please follow the rules of the VCI-Storage-Concept for chemicals. <br />· Further information about storage conditions: Keep container tightly sealed. <br />· 7.3 Specific end use(s) No further relevant information available.</p> <p>*</p> <p>SECTION 8: Exposure controls/personal protection <br />· Additional information about design of technical systems: <br />It must be possible to wash the skin in the working area. <br />Eye-wash bottle must be available. <br />· 8.1 Control parameters <br />· Components with critical values that require monitoring at the workplace: <br />65997-15-1 Cement, portland, chemicals (2.5-10%) <br />WEL Long-term value: 10* 4** mg/m³ <br />*inhalable dust **respirable dust <br />· Additional information: The lists that were valid during the compilation were used as basis. <br />· 8.2 Exposure controls <br />· Personal protective equipment <br />· General protective and hygienic measures <br />The usual precautionary measures should be adhered to in handling the chemicals. <br />Vacuum clean contaminated clothing. Do not blow or brush off contamination. <br />Avoid contact with the eyes and skin. <br />Be sure to clean skin thoroughly after work and before breaks. <br />· Breathing equipment: Use respiratory protective equipment at formation of dust. <br />· Protection of hands: Hand Protection: Nitril-rubber-latex-gloves. <br />· Material of gloves <br />Butyl rubber II R: Thickness ≥ 0,5mm; Break through time ≥ 480 min <br />· Penetration time of glove material <br />The exact break trough time has to be found out by the manufacturer of the protective gloves and <br />has to be observed. <br />· Eye protection: Safety glasses <br />· Body protection: <br />Protective work clothing. <br />(Contd. on page 4) <br />GB</p> <p>42.0</p> <p>Page 4/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 17.05.2016</p> <p>Version number 17</p> <p>Revision: 17.05.2016</p> <p>Trade name: SOLOPLAN-FA <br />(Contd. of page 3)</p> <p>Contaminated protection clothes must be cleaned carfully before reuse. <br />*</p> <p>SECTION 9: Physical and chemical properties <br />· 9.1 Information on basic physical and chemical properties <br />· General Information <br />· Appearance: <br />Form: <br />Powder <br />Colour: <br />Grey <br />· Smell: <br />Weak, characteristic <br />· Odour threshold: <br />Not determined. <br />· pH-value:</p> <p>Not applicable.</p> <p>· Change in condition <br />Melting point/Melting range: <br />Boiling point/Boiling range:</p> <p>Not determined <br />not apply</p> <p>· Flash point:</p> <p>Not applicable</p> <p>· Inflammability (solid, gaseous)</p> <p>Not determined.</p> <p>· Ignition temperature: <br />Decomposition temperature:</p> <p>Not determined.</p> <p>· Self-inflammability:</p> <p>Product is not selfigniting.</p> <p>· Danger of explosion:</p> <p>Product is not explosive.</p> <p>· Critical values for explosion: <br />Lower: <br />Upper:</p> <p>Not determined. <br />Not determined.</p> <p>· Steam pressure:</p> <p>Not applicable.</p> <p>· Density <br />Settled apparent density <br />Relative density <br />Vapour density <br />Evaporation rate <br />· Solubility in / Miscibility with <br />Water:</p> <p>1.34 kg/m³ <br />Not determined. <br />Not applicable. <br />Not applicable. <br />miscible</p> <p>· Partition coefficient (n-octanol/water): Not determined. <br />· Viscosity: <br />dynamic: <br />kinematic: <br />· 9.2 Other information</p> <p>*</p> <p>Not applicable. <br />Not applicable. <br />No further relevant information available.</p> <p>SECTION 10: Stability and reactivity <br />· 10.1 Reactivity No further relevant information available. <br />· 10.2 Chemical stability <br />· Thermal decomposition / conditions to be avoided: <br />No decomposition if used according to specifications. <br />· 10.3 Possibility of hazardous reactions No dangerous reactions known <br />· 10.4 Conditions to avoid No further relevant information available. <br />· 10.5 Incompatible materials: No further relevant information available. <br />(Contd. on page 5) <br />GB</p> <p>42.0</p> <p>Page 5/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 17.05.2016</p> <p>Version number 17</p> <p>Revision: 17.05.2016</p> <p>Trade name: SOLOPLAN-FA <br />(Contd. of page 4)</p> <p>· 10.6 Hazardous decomposition products: No dangerous decomposition products known <br />*</p> <p>SECTION 11: Toxicological information <br />· 11.1 Information on toxicological effects <br />· Acute toxicity Based on available data, the classification criteria are not met. <br />· LD/LC50 values that are relevant for classification: No dates existing. <br />· Primary irritant effect: <br />· Skin corrosion/irritation Based on available data, the classification criteria are not met. <br />· Serious eye damage/irritation <br />Causes serious eye damage. <br />· Respiratory or skin sensitisation Based on available data, the classification criteria are not met. <br />· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) <br />· Germ cell mutagenicity Based on available data, the classification criteria are not met. <br />· Carcinogenicity Based on available data, the classification criteria are not met. <br />· Reproductive toxicity Based on available data, the classification criteria are not met. <br />· STOT-single exposure Based on available data, the classification criteria are not met. <br />· STOT-repeated exposure Based on available data, the classification criteria are not met. <br />· Aspiration hazard Based on available data, the classification criteria are not met.</p> <p>*</p> <p>SECTION 12: Ecological information <br />· 12.1 Toxicity <br />· Aquatic toxicity: No further relevant information available. <br />· 12.2 Persistence and degradability No further relevant information available. <br />· 12.3 Bioaccumulative potential No further relevant information available. <br />· 12.4 Mobility in soil No further relevant information available. <br />· Additional ecological information: <br />· General notes: <br />Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />Do not allow undiluted product or large quantities of it to reach ground water, water bodies or <br />sewage system. <br />· 12.5 Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />· 12.6 Other adverse effects No further relevant information available.</p> <p>*</p> <p>SECTION 13: Disposal considerations <br />· 13.1 Waste treatment methods <br />· Recommendation <br />Must not be disposed of together with household garbage. Do not allow product to reach sewage <br />system. <br />· European waste catalogue <br />10 00 00 Inorganic wastes from thermal processes <br />10 12 00 wastes from manufacture of ceramic goods, bricks, tiles and constructions products <br />10 12 03 other particulates and dust <br />· Uncleaned packagings: <br />· Recommendation: Disposal must be made according to official regulations. <br />· Recommended cleaning agent: Water, if necessary with cleaning agent. <br />GB</p> <p>(Contd. on page 6)</p> <p>42.0</p> <p>Page 6/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 17.05.2016</p> <p>Version number 17</p> <p>Revision: 17.05.2016</p> <p>Trade name: SOLOPLAN-FA <br />(Contd. of page 5)</p> <p>SECTION 14: Transport information <br />· 14.1 UN-Number <br />· ADR</p> <p>Void</p> <p>· 14.2 UN proper shipping name <br />· ADR</p> <p>Void</p> <p>· 14.3 Transport hazard class(es) <br />· ADR <br />· Class</p> <p>Void</p> <p>· 14.4 Packing group <br />· ADR</p> <p>Void</p> <p>· 14.5 Environmental hazards: <br />· Marine pollutant:</p> <p>No</p> <p>· 14.6 Special precautions for user</p> <p>Not applicable.</p> <p>· 14.7 Transport in bulk according to Annex II <br />of Marpol and the IBC Code <br />Not applicable. <br />· Transport/Additional information: <br />· Number/Letter:</p> <p>*</p> <p>SECTION 15: Regulatory information <br />· 15.1 Safety, health and environmental regulations/legislation specific for the substance or <br />mixture <br />· National regulations <br />· Water hazard class: <br />Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />The classification based on german instructions. <br />· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.</p> <p>*</p> <p>SECTION 16: Other information <br />These data are based on our present knowledge. However, they shall not constitute a guarantee for <br />any specific product features and shall not establish a legally valid contractual relationship. <br />· Relevant phrases <br />H315 Causes skin irritation. <br />H318 Causes serious eye damage. <br />H335 May cause respiratory irritation. <br />· Department issuing data specification sheet: Environment protection department. <br />· Contact: Mr. Guido Herfort <br />· Abbreviations and acronyms: <br />ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the <br />International Carriage of Dangerous Goods by Road) <br />GHS: Globally Harmonised System of Classification and Labelling of Chemicals <br />EINECS: European Inventory of Existing Commercial Chemical Substances <br />ELINCS: European List of Notified Chemical Substances <br />CAS: Chemical Abstracts Service (division of the American Chemical Society) <br />LC50: Lethal concentration, 50 percent <br />LD50: Lethal dose, 50 percent <br />PBT: Persistent, Bioaccumulative and Toxic <br />vPvB: very Persistent and very Bioaccumulative <br />Skin Irrit. 2: Skin corrosion/irritation, Hazard Category 2 <br />Eye Dam. 1: Serious eye damage/eye irritation, Hazard Category 1 <br />STOT SE 3: Specific target organ toxicity - Single exposure, Hazard Category 3</p> <p>· * Data compared to the previous version altered. <br />GB</p>
