KSK-Abdichtungsbahn_205041_Englisch.pdf
4 Pages
892 KB
Download
<h1>KSK-Abdichtungsbahn_205041_Englisch.pdf</h1> <p>Technical Datasheet <br />KSK-Abdichtungsbahn <br />Cold self-adhesive bitumen waterproofing sheet</p> <p>Material number</p> <p>Length</p> <p>Width, article</p> <p>Material strength</p> <p>Contents</p> <p>Packaging</p> <p>Colour</p> <p>205041001</p> <p>15 m</p> <p>100 cm</p> <p>approx. 1.5 mm</p> <p>1</p> <p>Roll</p> <p>Black</p> <p>Product features <br />Cold self-adhesive waterproofing membrane <br />Masonry work barrier membrane in accordance with DIN EN 14967 <br />Flexible and tear resistant <br />Radon tight</p> <p>Advantages <br />Immediately resistant to water and driving rain <br />Crack bridging <br />Bitumen-compatible</p> <p>Fields of application / waterproofing <br />As retroactive building waterproofing in accordance with WTA datasheet 4-6 <br />As an adhesive for insulation, protection and drainage boards <br />As a wall sealing membrane for L- and Z-waterproofing in double-layer masonry work (DIN EN 14967) <br />As an inlay in thick layer coatings</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>10/07/2023</p> <p>Technical Datasheet <br />KSK-Abdichtungsbahn <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Surface weight <br />Crack bridging DIN 28052-6 (PG MDS/AIV) <br />Waterproofing membrane cold bending procedure DIN EN 1109 <br />Heat resistance (DIN 52123) <br />Watertightness DIN EN 1928 (procedure B) <br />Water vapour diffusion coefficient µ <br />Tensile force, lengthwise in accordance with DIN 527-3 <br />Tensile force, crosswise in accordance with DIN 527-3 <br />Expansion, lengthwise (DIN EN ISO 527-3) <br />Expansion, crosswise (DIN EN ISO 527-3) <br />Resistance against static loads DIN EN 12730 (procedure B) <br />Tear resistance in accordance with DIN EN 12310-1 <br />Resistance against shock loads (procedure A) <br />Resistance against shock loads (procedure B) <br />Shear resistance of the joint seams <br />Sd value <br />Resistance to chemicals <br />Resistance to ageing <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>Roll goods <br />Composite polymer bitumen and HDPE carrier film <br />approx. 1.7 kg/m² ± 5% <br />> 5 mm <br />-30 °C <br />70 °C <br />60 kPa / 24 hours <br />< 71400 <br />approx. 200 N / 50 mm <br />approx. 200 N / 50 mm <br />approx. 150 % <br />approx. 150 % <br />20 kg/24 h <br />> 140 N <br />approx. 200 mm <br />approx. 600 mm <br />> 200 N / 50 mm <br />> 107 m <br />Passed <br />Passed <br />E</p> <p>Application <br />Substrate/application temperature</p> <p>from 5 °C to 35 °C</p> <p>Application technology <br />Aids/tools <br />Scissors/knife <br />Pressure roller</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5.</p> <p>Dry <br />Load-bearing <br />Even <br />Sealed in the surface <br />Free of adhesion inhibiting substances</p> <p>Preparing the surface <br />1. Apply primer consisting of ASOL-FE (diluted 1:1 with water). <br />2. The primer must be completely dry / must have reacted fully before the subsequent work steps are carried out. <br />3. For transitions to cementitious waterproofing, e.g. AQUAFIN-RB400, a primer can be omitted.</p> <p>Preparing the details <br />1. Edges are to be chamfered and corners are to be rounded. <br />2. Depressions > 5 mm and mortar pockets, plaster grooves in brickwork, open butt or bed joints, damaged areas, large pored substrates or <br />uneven masonry work must be levelled in advance with ASOCRET-M30 (cement-based mortar). <br />3. Negative water pressure cannot be absorbed by KSK-Abdichtungsbahn. Waterproof areas where this is expected with AQUAFIN®-1K. <br />4. Pre-screen internal corners / floor transitions with AQUAFIN®-1K or ASOCRET-M30 in a consistency that is able to screen. Apply a coved fillet <br />while still wet using ASOCRET-M30. After curing, recoat the area including the base slab face with AQUAFIN®-1K.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>10/07/2023</p> <p>Technical Datasheet <br />KSK-Abdichtungsbahn <br />Usage <br />Application <br />1. Bond all joints, edges, corners and coves with an approx. 30 cm wide reinforcing strip of KSK waterproofing sheet FB / KSK waterproofing <br />sheet before laying over the entire surface. <br />2. Cut KSK-Abdichtungsbahn to the desired length. <br />3. Peel off the release film on the back and stick it to the end of the waterproofing membrane with an overlap of ≥ 8 cm and press on firmly. <br />4. Press the sheet down firmly, free of wrinkles and air bubbles. <br />5. Alternatively, butt joints can be covered with KSK waterproofing membrane FB. <br />6. A minimum overlap of 10 cm is required for connections. <br />7. The ends of the sheets must be secured against detachment or moisture penetration by means of plastering rails or cross-cut strips. Alternatively, <br />the ends of the sheets can be secured with KSK finishing tape. <br />8. Protective, drainage or insulation boards can be glued with COMBIDIC®-2K-CLASSIC or COMBIDIC®-2K-PREMIUM.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 12 months in the original container.</p> <p>Disposal <br />Hand over product residues to approved disposal companies.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of KSK-Abdichtungsbahn! <br />Store KSK-Abdichtungsbahn at room temperature (approx. +20 °C) until immediately before applying and only apply in dry weather. <br />Do not store or apply KSK-Abdichtungsbahn in direct sunlight. <br />Do not apply KSK-Abdichtungsbahn to damp substrates. <br />KSK-Abdichtungsbahn may not be glued or overcoated afterwards with products containing solvents.</p> <p>Annotations <br />Conformity / Declaration / Verification</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>10/07/2023</p> <p>Technical Datasheet <br />KSK-Abdichtungsbahn <br />Impact classes and typical applications in accordance with DIN 18533</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>10/07/2023</p>
