INDUFLEX-PU, Leistungserklärung gemäß EN 15651-4_27.10.2016_GB.pdf
2 Pages
68.5 KB
Download
<h1>INDUFLEX-PU, Leistungserklärung gemäß EN 15651-4_27.10.2016_GB.pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>INDUFLEX-PU <br />20 6415 <br />1.</p> <p>Unique identification code of the product type:</p> <p>EN 15651—4 PW EXT-INT CC</p> <p>2. Intended use:</p> <p>Sealant for movement joints in floors for <br />interior and exterior application (intended <br />for use in cold climates)</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>4</p> <p>5. Harmonised standard</p> <p>EN 15651-4:2012</p> <p>6. Notified test laboratory:</p> <p>not relevant</p> <p>7. Declared performance : <br />Essential charakteristics</p> <p>Reaction to fire <br />Water tightness and air tightness <br />Tensile properties at maintained <br />extension <br />Loss of volume <br />Tear resistance <br />Adhesion/cohesion properties at <br />maintained extension after 28 days <br />water immersion <br />Adhesion/cohesion properties at <br />maintained extension after 28 days <br />salt water immersion <br />Tensile properties (i.e. at <br />maintained extension in cold <br />climates) -30°C <br />Durability</p> <p>Performance</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical <br />specification</p> <p>class E</p> <p>NF <br />≤ 10% <br />NF <br />NF, change of secant <br />modulus < 50% <br />NF, change of secant <br />modulus < 50%</p> <p>NF</p> <p>passed</p> <p>System 4</p> <p>EN 156514:2012</p> <p>The performance of the product identified above is in conformity with the set of declared performance/s. This <br />declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole <br />responsibility of the manufacturer identified above.</p> <p>Signed for and on behalf of the manufacturer by: <br />Michael Hölscher, technical service surface protection <br />(name and function)</p> <p>Detmold, 27.10.2016</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under <br />http://www.schomburg.com/de/en/downloads/datasheets/materials_safety_data_sheet/d <br />http://www.schomburg.com/de/en/downloads/datasheets/technical_data_sheet/d</p> <p>For the processing of the joint sealant ASOFLEX-D-PU the current technical data sheet is binding. <br />Joint edges are to be handled with a suitable primer accordingly Primer-2000-S for absorbing <br />substrates , like concrete, granite paving or semi-rigid coatings. <br />Primer-2000 for non-absorbing substrates , like steel, rigid-PVC or polymer concrete.</p>
