Declaration of Performance according Annex III of the Regulation (EU) No 305/2011 amended by Commissions delegated Regulation (EU) No 574/2014
for the product
INDUFLEX-PS 20 6414
1. Unique identification code of the product type:
EN 14188-2 sl M
2. Intended use:
Joint sealant for fuel-resistant joints in concrete surfaces and other traffic areas
3. Manufacturer:
Schomburg GmbH & Co. KG Aquafinstrasse 2-8 32760 Detmold
4. System or systems of assessment and verification of constancy of performance of the construction product as:
System: 4
5. Harmonised standard
EN 14188-2:2004
6. Notified test laboratory:
not relevant
7. Declared performance : Essantial characteristic
Fire reaction Adhesion strength
Adhesion and Tensile Strength Recovering capability Permanence of Water Impermeability Adhesion and Tensile Strength after storage in liquid chemicals of class B,C and D Resistance against hydrolysis Artificial Weathering by UV exposure Flame restistance
Performance
System of assessment and verification of constancy of performance
Harmonised technical specification
class E No failure at -20°C < 0,6 MPa Tensile Modulus at 100% Elongation at 23°C ≥ 0,15 MPa at -20°C ≤ 0,6 MPa ≥ 70% passed No failure
passed passed passed
System 4
The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: Michael Hölscher, technical service surface protection (name and function)
Detmold, 28.10.2016
This declaration of performance was created electronically. It is valid without manual signature. The current material safety data sheet and technical data sheet is downloadable under http://www.schomburg.com/de/en/downloads/datasheets/materials_safety_data_sheet/d or http://www.schomburg.com/de/en/downloads/datasheets/technical_data_sheet/d