FIX-20-T_201817_Englisch.pdf
3 Pages
385 KB
Download
<h1>FIX-20-T_201817_Englisch.pdf</h1> <p>Technical Datasheet <br />FIX-20-T <br />Rapid mortar, swelling</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>201817001</p> <p>6</p> <p>KG</p> <p>Bucket</p> <p>Cement grey</p> <p>201817002</p> <p>20</p> <p>KG</p> <p>Bucket</p> <p>Cement grey</p> <p>Product features <br />Crystalline sealing effect <br />High early and ultimate strength <br />Swellable</p> <p>Advantages <br />Chloride-free <br />Strong bond with concrete substrates <br />Rapid solidification, even under water <br />Free of corrosion-promoting substances <br />Rapid setting (solidification starts after 5 minutes)</p> <p>Areas of application <br />As a rapid waterproofing material <br />For sealing water-bearing holes, cracks, fissures in concrete, masonry work and natural stone structures <br />For the repair of concrete surfaces prior to the application of a surface waterproofing system (e.g. AQUAFIN®-IC) <br />For fastening wall anchors and other assembly parts that must be able to withstand short-term loads <br />For interior and exterior use</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>05/02/2024</p> <p>Technical Datasheet <br />FIX-20-T <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Grain size max <br />Compressive strength (1 hrs.) <br />Compressive strength (24 hrs.) <br />Compressive strength (28 days) <br />Start of solidification</p> <p>1 component system <br />Special cement <br />Mortar-like <br />< 0.5 mm <br />approx. 3 N/mm² <br />approx. 15 N/mm² <br />approx. 30 N/mm² <br />approx. 1–2 minutes</p> <p>Mixing <br />Mixing time</p> <p>approx. 1 - 2 minutes</p> <p>Application <br />Substrate/application temperature <br />Pot life <br />Consumption per litre - voids</p> <p>from 5 °C to 30 °C <br />approx. 2 minutes <br />approx. 2 kg/l</p> <p>Application technology <br />Aids/tools <br />Clean mixing bucket <br />Filler <br />Protective gloves <br />Trowel <br />Flat trowel</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4.</p> <p>Firm <br />Load-bearing <br />Clean <br />Free of adhesion inhibiting substances</p> <p>Preparing the details <br />For better anchoring of FIX 10-S, chisel out the leak position in a dovetail shape.</p> <p>Preparing the surface <br />Remove loose pieces of plaster and masonry.</p> <p>Usage <br />Mixing <br />1. Pour the required quantity of water into a clean mixing bucket. <br />2. Completely add the powder and mix until homogeneous and free from lumps.</p> <p>Application <br />1. Form plug with mortar Press into the leak position by hand until the material is cured. Curing is preceded by a clearly noticeable warming up. <br />2. Use material as mortar or alternatively in dry form. <br />3. Install a drain using water hoses/pipes if the water pressure is high. The water pressure is therefore minimised and makes tamping easier. Chisel <br />out a depression in the area of the strongest water flow. Fix the hose / pipe in place with FIX-20-T mortar. Remove the hose / pipe after drying. <br />Plug the hose with mortar as described.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>05/02/2024</p> <p>Technical Datasheet <br />FIX-20-T <br />Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 12 months in the original container.</p> <p>Disposal <br />Product leftovers can be disposed of in accordance with disposal code AVV 17 01 01.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of FIX-20-T! <br />Appropriate preliminary tests must be carried out. <br />FIX-20-T must not be mixed with plaster or brought into contact with plaster. <br />At low temperatures, use warm water and pre-warmed powder. At high temperatures, use cool water and cooled powder. The temperature <br />of the powder must not exceed +23 °C.</p> <p>GISCODE: ZP1</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>05/02/2024</p>
