THERMOPAL-SP Leistungserklärung_160222-GB.pdf
2 Pages
67.3 KB
Download
<h1>THERMOPAL-SP Leistungserklärung_160222-GB.pdf</h1> <p>Declaration of Performance <br />according to Annex III of the Regulation (EU) No. 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>THERMOPAL-SP <br />201419-3</p> <p>1.</p> <p>Unique identification code of the product type:</p> <p>201419</p> <p>2. Intended use:</p> <p>General purpose rendering/ <br />plastering mortar (GP)</p> <p>3. Manufacturer:</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 4</p> <p>5. Harmonized standard:</p> <p>EN 998-1:2016</p> <p>6. Notified test laboratory:</p> <p>not relevant</p> <p>7. Declared performance:</p> <p>Performance <br />Essential characteristic <br />Compressive strength <br />Adhesive tensile strength, 28d <br />Image after break <br />Capillary water uptake <br />Coefficient of water-vapor <br />permeability <br />Thermal conductivity (average <br />value λ10, dry mat.), average value <br />from table (P 50%), EN 1745 <br />Fire reaction <br />Durability (frost resistance) <br />Dangerous substances</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical specification</p> <p>CS IV <br />≥ 0,08 N/mm2 <br />A <br />Wc0 <br />≤ 25 <br />EN 998-1:2016 <br />< 0,83 <br />A1 <br />resistant in case of <br />handling according to the <br />technical data sheet <br />NPD</p> <p>System 4</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4.</p> <p>Signed for and on behalf of the manufacturer by: <br />Stefan Flügge, <br />technical Service <br />(name and function)</p> <p>Detmold, 16.02.2022</p> <p>This declaration of performance was created electronically. It is valid without manual signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>http://www.schomburg.de/de/Sicherheitsdatenblatt-datenblaetter.html <br />or <br />http://www.schomburg.de/de/Technisches_Merkblatt-datenblaetter.html</p>
