Brochure Cementitious waterproofing slurries in waterproofing EN 0418.pdf
8 Pages
1.53 MB
Download
<h1>Brochure Cementitious waterproofing slurries in waterproofing EN 0418.pdf</h1> <p>Waterproofing and Restoration</p> <p>Cementitious <br />waterproofing slurries <br />in waterproofing. <br />Reliable protection against water penetration. <br />Rigid and flexible cementitious waterproofing for <br />safe construction progress. <br />Problems Solved.</p> <p>Cementitious waterproofing slurries <br />Safe solutions <br />for waterproofing <br />For more than 50 years, the name AQUAFIN stands for safe waterproofing. <br />Cementitious waterproofing slurries of SCHOMBURG are the perfect solution <br />for everyday and special demands in construction. <br />Rapid hybrid waterproofing is ensured by AQUAFIN-RS300 by a reactive <br />drying of construction progress even under challenging climatic conditions. The <br />new flexible waterproofing slurry AQUAFIN-2K/M-PLUS is a new development <br />based on many years of experience and stands for reliable and proven safety <br />with outstanding processing properties. The rigid waterproofing slurry <br />AQUAFIN-1K is the perfect choice if a pre-waterproofing is required or there <br />are no substrates prone to cracking. All the three waterproofing slurries as well <br />as their application areas are introduced below.</p> <p>CONTENTS <br />3 AQUAFIN-RS300 <br />Rapid hybrid waterproofing <br />4 AQUAFIN-2K/M-PLUS <br />Crack-bridging waterproofing slurry <br />5 AQUAFIN-1K <br />Rigid waterproofing slurry <br />6 Areas of application and material <br />consumption</p> <p>2</p> <p>schomburg.com</p> <p>AQUAFIN®-RS300 <br />The reactive one. <br />Rapid hybrid waterproofing. <br />For safe construction progress even with <br />challenging climatic conditions.</p> <p>SCHOMBURG <br />GmbH & Co. KG <br />Detmold</p> <p>Properties <br />· Two-component. <br />· Multifunctional. <br />· Without seams or joints. <br />· Hydraulic, self-cross-linking setting. <br />· Rapid reactive drying, almost climate-independent. <br />· Ready for further processing after approx. 2–4 hours. <br />· Very low drying loss. <br />· Bonding on damp substrates without primers. <br />· Highly flexible and crack-bridging. <br />· Suitable for all load-bearing, conventional substrates. <br />· For interior and exterior use. <br />· Sulphate-resistant.</p> <p>2–4</p> <p>Rapidly <br />walkable <br />2–4 hours</p> <p>Technical data <br />Basis</p> <p>Polymeric dispersion (liquid <br />component), special cement <br />and filter materials (powder <br />component)</p> <p>Processing / <br />substrate temperature</p> <p>+5 °C to +30 °C</p> <p>Pot life*</p> <p>approx. 45 minutes</p> <p>Ready for further processing*</p> <p>after approx. 2–4 hours</p> <p>Processing</p> <p>Hand, machine</p> <p>Material consumption</p> <p>see page 7</p> <p>Packaging</p> <p>10 kg and 20 kg combination <br />container, 36 kg container unit</p> <p>* at +23 °C and 50 % rel. humidity</p> <p>Smooth <br />application <br />Very convenient</p> <p>Flexible <br />processing <br />Hand and machine</p> <p>schomburg.com</p> <p>3</p> <p>AQUAFIN®-2K/M-PLUS <br />The classic one. <br />Crack-bridging waterproofing slurry. <br />Flexible and reliable waterproofing <br />with optimum processing properties.</p> <p>NEW!</p> <p>SCHOMBURG <br />GmbH & Co. KG <br />Detmold</p> <p>Properties <br />· Two-component. <br />· Without seams or joints. <br />· Flexible and crack-bridging. <br />· Suitable for all load-bearing, conventional substrates. <br />· Bonding on damp substrates without primers. <br />· Vapour-permeable, resistant to frost, UV and ageing-resistant. <br />· Resistant to de-icing salt. <br />· For interior and exterior use. <br />· Waterproofing. <br />· Sealing in combination (AIV). <br />· Resistant to concrete-damaging water <br />according to DIN 4030.</p> <p>Long <br />workability <br />60 minutes</p> <p>Smooth <br />application <br />Very convenient</p> <p>Flexible <br />processing <br />Hand and machine</p> <p>4</p> <p>schomburg.com</p> <p>Technical data <br />Basis</p> <p>Polymeric dispersion (liquid <br />component), sand/cement, <br />additives (powder component)</p> <p>Processing / <br />substrate temperature</p> <p>+5 °C to +30 °C</p> <p>Pot life*</p> <p>approx. 60 minutes</p> <p>Ready for further processing*</p> <p>after approx. 3–6 hours</p> <p>Processing</p> <p>Hand, machine</p> <p>Material consumption</p> <p>see page 7</p> <p>Packaging</p> <p>21 kg combination container, <br />7 kg and 35 kg container unit</p> <p>* at +23 °C and 50 % rel. humidity</p> <p>AQUAFIN®-1K <br />The rigid one. <br />Rigid waterproofing slurry. <br />The perfect choice if a pre-waterproofing is necessary or <br />new formation of cracks can be excluded.</p> <p>SCHOMBURG <br />GmbH & Co. KG <br />Detmold</p> <p>Properties <br />· One-component. <br />· Hydraulic setting. <br />· Sulphate-resistant. <br />· For interior and exterior use. <br />· Bonding on slightly damp substrates without primers. <br />· Usable according to DIN 18533.</p> <p>Long <br />workability <br />60 minutes</p> <p>Technical data <br />Basis</p> <p>Sand, cement <br />(polymer-modified)</p> <p>Processing / <br />substrate temperature</p> <p>+5 °C to +30 °C</p> <p>Pot life*</p> <p>approx. 60 minutes</p> <p>Load*</p> <p>after ca. 24 hours</p> <p>Processing</p> <p>Hand, machine</p> <p>Material consumption</p> <p>see page 7</p> <p>Packaging</p> <p> 5 kg foil bag, <br />2 <br />6 kg foil bag</p> <p>* at +23 °C and 50 % rel. humidity</p> <p>Smooth <br />application <br />Very convenient</p> <p>Flexible <br />processing <br />Hand and machine</p> <p>schomburg.com</p> <p>5</p> <p>Areas of application and material consumption <br />As waterproofing according to DIN 18533, WTA technical data sheet 4–6 “Subsequent waterproofing”</p> <p> 1 As waterproofing. <br /> 2 To bind ASO-Joint-Sleeves. <br /> 3 As sealing at foot of plinth. <br />2</p> <p>1 <br />3</p> <p>Areas of application AQUAFIN-RS300 and AQUAFIN-2K/M-PLUS.</p> <p> 1 As waterproofing in plinth area without <br />cellar. <br /> 2 As transverse waterproofing in and <br />under walls.</p> <p>1</p> <p>2</p> <p>Areas of application AQUAFIN-RS300 and AQUAFIN-2K/M-PLUS.</p> <p>6</p> <p>schomburg.com</p> <p> 1 Waterproofing in plinth area with cellar. <br /> 2 As moisture protection for plaster in <br />contact with earth. <br />2</p> <p>1</p> <p>Areas of application AQUAFIN-RS300 and AQUAFIN-2K/M-PLUS.</p> <p>Material consumption <br />AQUAFINRS300</p> <p>AQUAFIN2K/M-PLUS</p> <p>AQUAFIN1K</p> <p>According to <br />Dry film <br />DIN 18533-3 <br />thickness in mm <br />Basement walls and floor slabs* ≥ 2</p> <p>Wet film <br />thickness in mm <br />approx. 2.2</p> <p>Coverage <br />in kg/m2 <br />3.0</p> <p>Coverage <br />in kg/m2 <br />3.5</p> <p>Coverage <br />in kg/m2 <br />–</p> <p>Plinth waterproofing</p> <p>≥2</p> <p>approx. 2.2</p> <p>3.0</p> <p>3.5</p> <p>–</p> <p>Transverse waterproofing</p> <p>≥2</p> <p>approx. 2.2</p> <p>3.0</p> <p>3.5</p> <p>–</p> <p>“Subsequent waterproofing” as per WTA data sheet 4–6 <br />Soil moisture / non-accumulating ≥ 2 <br />approx. 2.2 <br />seepage water</p> <p>3.0</p> <p>3.5</p> <p>–</p> <p>Non-pressure water</p> <p>≥2</p> <p>approx. 2.2</p> <p>3.0</p> <p>3.5</p> <p>–</p> <p>Accumulating / <br />pressing water</p> <p>≥3</p> <p>approx. 3.3</p> <p>4.5</p> <p>5.3</p> <p>–</p> <p>Levelling layers</p> <p>1</p> <p>approx. 1.1</p> <p>1.5</p> <p>1.75</p> <p>1.75</p> <p>Pre-waterproofing</p> <p>1</p> <p>approx. 1.1</p> <p>–</p> <p>–</p> <p>1.75</p> <p>Possible additional consumption in case of uneven substrates and manual variations must be considered. <br />* In case of water evaluation class W1-E and substrate concrete.</p> <p>schomburg.com</p> <p>7</p> <p>SCHOMBURG is recognized for its <br />development competency and is distinguished <br />both nationally and internationally with over <br />80 years in the market. System based <br />construction materials from our own production <br />enjoy a high reputation worldwide. <br />Industry professionals value the level of service <br />provided by the SCHOMBURG Group, along <br />with our large range of high quality products. <br />In order to stay at the forefront of a continuously <br />advancing market we are always investing in <br />research and development of new and current <br />products. This guarantees high quality products, <br />which in turn leads to customer satisfaction.</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D -32760 Detmold (Germany) <br />phone + 49 - 52 31-953- 00 <br />fax + 49 - 52 31- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>04/18 MSt/TAN/TM </p> <p>• Waterproofing and Restoration <br />• Tiles / Natural Stone / Screed installation <br />• Protective Flooring / Coating Systems <br />• Concrete Technology</p> <p>Subject to change without prior notification. Users must always refer to the most recent issue of the respective applicable technical data sheet for the product concerned.</p> <p>The SCHOMBURG group of companies <br />develops, produces and distributes construction <br />materials systems for the areas of:</p>
