1659_D151EN160509_ASODUR_SG3_Superfast_DGNB_productdeclaration.pdf
5 Pages
137 KB
Download
<h1>1659_D151EN160509_ASODUR_SG3_Superfast_DGNB_productdeclaration.pdf</h1> <p>Reference: D15-1659 / 09.05.2016</p> <p>Produktdeklaration - DGNB Neubauversion Büro- und Verwaltungsgebäude (NBV15)</p> <p>MANUFACTURER</p> <p>SCHOMBURG GmbH & Co. KG</p> <p>PRODUCT NAME</p> <p>ASODUR-SG3-Superfast</p> <p>Product Rating <br />▪ The product meets the requirements of quality level 1 to 3 and contributes to achieve 75 (of max. 100 achievable) checklist points according to criterion <br />'ENV1.2 Local Environmental Impact'. <br />▪ The product has an industry-wide Environmental Product Declaration (EPD), which can be used for the life cycle assessment according to criteria 'ENV <br />1.1' and 'ENV2.1'.</p> <p>Criterion ENV 1.2 Risks for the Local Environment - Ecological Quality <br />Quality Level 1</p> <p>10 Checklist Points</p> <p>Quality Level 2</p> <p>50 Checklist Points</p> <p>Quality Level 3</p> <p>75 Checklist Points</p> <p>Quality Level 4</p> <p>100 Checklist Point</p> <p>Criterion ENV 1.3.1 Sustainable Resources - Ecological Quality* <br />Quality Level 1</p> <p>10 Checklist Points</p> <p></p> <p>Quality Level 2</p> <p>50 Checklist Points</p> <p></p> <p>Quality Level 3</p> <p>100 Checklist Points</p> <p></p> <p>* This criterion is only applicable to wooden materials.</p> <p>Product Characteristics <br />Credit requirements fulfilled - the action level is achieved</p> <p># <br /># <br />#</p> <p>Rapid setting two component epoxy resin, primer, mortar, drainage resin and <br />casting resin. For priming cement-based surfaces, which are to be coated with <br />ASODUR-/INDUFLOOR systems. For producing repair mortars, which will be <br />trafficked again promptly. For producing levelling compounds and scratch coats as a <br />substrate preparation measure before applying coatings. Can be used to flood <br />repair cracks in screeds to DIN EN 13813. For producing epoxy resin screeds, <br />repair mortars and drainage mortars. Tested to EN 1504-2. Very low emissions GEV EMICODE EC1-R PLUS.</p> <p></p> <p>Credit is not applicable to this product</p> <p>22%</p> <p>X% of the product comply with the credit requirement</p> <p>—</p> <p>Required data not specified - for required data contact <br />manufacturer <br />Credit requirements are not fulfilled</p> <p>About DGNB Products - www.dgnb.de <br />This declaration helps to assess products easily according the certification system DGNB® Neubauversion Büro- und Verwaltungsgebäude (NBV15). <br />Products are not reviewed or certified by DGNB. DGNB credit requirements cover the performance of materials in aggregate, not the performance of <br />individual products or brands. Therefore the project team or the manufacturer is responsible to declare the compliance with the project requirements to <br />achieve DGNB points. <br />Above you find an explanation of the symbols. Detailed information are on the next pages. <br />Notice: This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The data sheet is only valid as DGNB evidence in conjunction with the manufacturer's declarations <br />and product certificates that prove the information given in this declaration. This declaration is no official certificate in terms of DGNB. The contents are based on manufacturer specifications. In spite of a diligent treatment of all <br />information HOINKA GmbH cannot guarantee the actuality or correctness of the published data. The interpretation of the DGNB criteria requirements can differ and depend on the project and the scope of application. In spite of a <br />diligent treatment of all information HOINKA GmbH cannot guarantee the correctness of evaluation in terms of the DGNB requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is <br />advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The content of this data sheet does not manifest any <br />legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is available in the internet. HOINKA GmbH ▪ greenbuildingproducts.eu ▪ Lembergweg 7/1 ▪ 71067 <br />Sindelfingen ▪ Tel. +49 7031 7659-441 ▪ Fax +49 7031 7659-443 ▪ www.greenbuildingproducts.eu ▪ contact@greenbuildingproducts.eu ▪ Geschäftsführer: Dipl.-Ing. Thomas Hoinka</p> <p>MANUFACTURER</p> <p>SCHOMBURG GmbH & Co. KG</p> <p>PRODUCT NAME</p> <p>ASODUR-SG3-Superfast</p> <p>Product assessment of complete system</p> <p>Topic</p> <p>Environmental Quality (ENV)</p> <p>Economic Quality (ECO)</p> <p>Sociocultural and <br />Functional Quality (SOC)</p> <p>Number</p> <p>Criteria</p> <p>Relevance</p> <p>Reference: D15-1659 / 09.05.2016</p> <p>Produktdeklaration - DGNB Neubauversion Büro- und Verwaltungsgebäude (NBV15)</p> <p>Evaluation</p> <p>ENV1.1</p> <p>Life cycle Assessment - Emissions</p> <p>An industry-wide Environmental Product Declaration (EPD) <br />does exist for this product.</p> <p>ENV1.2</p> <p>Local environmental impact</p> <p>Quality Level 3 is fulfilled</p> <p>ENV1.3.1</p> <p>Responsible procurement (Wood)</p> <p>ENV1.3.3</p> <p>Responsible procurement (Natural Stone)</p> <p>ENV2.1</p> <p>Life cycle Assessment - Primary Energy</p> <p>ENV2.2</p> <p>Potable water demand and wastewater volume</p> <p>ENV2.3</p> <p>Land Use</p> <p>ECO1.1</p> <p>Building-related life-cycle costs</p> <p>ECO2.1</p> <p>Suitability for conversion</p> <p>ECO2.2</p> <p>Marketability</p> <p>SOC1.1</p> <p>Thermal Comfort</p> <p>SOC1.2</p> <p>Indoor Air Quality</p> <p>SOC1.3</p> <p>Acoustic Comfort</p> <p>SOC1.4</p> <p>Visual Comfort</p> <p>SOC1.5</p> <p>Occupant control</p> <p>SOC1.6</p> <p>Quality of stay outdoor / indoor</p> <p>SOC1.7</p> <p>Safety</p> <p>SOC2.1</p> <p>Access for all</p> <p>SOC2.2</p> <p>Public access</p> <p>TEC1.2</p> <p>Noise protection</p> <p>TEC1.3</p> <p>Building envelope quality</p> <p>TEC1.4</p> <p>Adaptability of Technical Systems</p> <p>TEC1.5</p> <p>Ease of cleaning and maintenance</p> <p>TEC1.6</p> <p>Ease of dismantling and recycling</p> <p>TEC3.1</p> <p>mobility infrastructure</p> <p>PRO1.1</p> <p>Project preparation and planning</p> <p>PRO1.3</p> <p>Conceptual design and optimization in the planning</p> <p>PRO1.4</p> <p>Sustainability aspects in tender phase</p> <p>PRO1.5</p> <p>Documentation for Facility Management</p> <p>PRO1.6</p> <p>Design and urban quality</p> <p>PRO2.1</p> <p>Environmental impact of construction</p> <p>PRO2.2</p> <p>Construction quality assurance</p> <p>PRO2.3</p> <p>Systematic commissioning</p> <p>SITE1.1</p> <p>Site location risks</p> <p>SITE1.2</p> <p>Public image and social conditions</p> <p>SITE1.3</p> <p>Access to transportation</p> <p>SITE1.4</p> <p>Access to specific-use facilities</p> <p>Process Quality (PRO)</p> <p>Site Quality (SITE)</p> <p>An industry-wide Environmental Product Declaration (EPD) <br />does exist for this product.</p> <p>Siehe Produktbewertung SOC1.4</p> <p>Reference: D15-1659 / 09.05.2016</p> <p>Produktdeklaration - DGNB Neubauversion Büro- und Verwaltungsgebäude (NBV15)</p> <p>MANUFACTURER</p> <p>SCHOMBURG GmbH & Co. KG</p> <p>PRODUCT NAME</p> <p>ASODUR-SG3-Superfast</p> <p>Product assessment for criteria ENV1.2 - Local environmental impact</p> <p>The product fulfills the requirements for Quality Level 1-3</p> <p>Assessment:</p> <p>Quality Level 3</p> <p>Goals and Relevance <br />Certain materials, construction products and preparations are a risk for soil, air, groundwater and <br />surface water as well as for human's health, flora and fauna. In order to minimize risks for humans and <br />the local environment, materials, (construction) products and preparations need to be reduced ,avoided <br />or substituted, which due to their material properties or ingredients are a risk for surface and ground <br />water, soil or air. Especially those materials, (construction) products and preparations must be reduced <br />,avoided or replaced, which affect human health, flora and fauna or harm within a short-, medium / or <br />long-term period . This affects the entire life cycle - from production, processing at site, use of (building) <br />inventory and disposal (dismantling, recycling, landfilling). These local risks are assessed material and <br />product related. Hence eco-and human toxicological impact categories of LCA can not be applied due to <br />lack of evaluation and measurement procedures.</p> <p>Product Assessment <br />Relevant Products <br />8</p> <p>Primers, primer coatings, putties <br />AND adhesives under wall AND <br />floor coverings (eg tiles, carpets, <br />wooden floors, resilient flooring except wallpaper) <br />Subject: All installation materials <br />AND auxiliary substances for <br />coating of surfaces (wall & floor)</p> <p>Relevant Products <br />9</p> <p>Barrier coatings, floor resins, <br />sealings under tiles</p> <p>Requirements of Quality Levels <br />Quality Level 1</p> <p>Theproduct belongs to GISCODEgroup D1, RU 0,5, RU 1, RE1 or <br />RS10?</p> <p>Quality Level 2</p> <p>The product is EMICODE certified <br />(EC1, EC1PLUS , EC1-R, <br />EC1PLUS-R) or Blauer Engel <br />certified (RAL UZ 113)</p> <p>Quality Level 3</p> <p>The product is EMICODE certified <br />(EC1, EC1PLUS , EC1-R, <br />EC1PLUS-R) or Blauer Engel <br />certified (RAL UZ 113)</p> <p>Quality Level 4</p> <p>The product is EMICODE certified <br />(EC1, EC1PLUS , EC1-R, <br />EC1PLUS-R) or Blauer Engel <br />certified (RAL UZ 113)</p> <p>Requirements of Quality Levels</p> <p>Quality Level 1</p> <p>Quality Level 2</p> <p>Quality Level 3</p> <p>Quality Level 4</p> <p>Assessment of Product</p> <p>Evaluation</p> <p>The product meets the requirements <br />for EMICODE EC1 Plus R.</p> <p>Quality Level 4</p> <p>Assessment of Product</p> <p>Evaluation</p> <p>GISCODE D1, RE0, RE 1, RU 0,5 <br />orr RU 1 <br />GISCODE D1, RE0, RE 1, RU 0,5 <br />The product meets the requirements <br />orr RU 1 <br />for EMICODE EC1 Plus R. <br />GISCODE D1, RE0, RE1, RU 0,5, <br />RU 1 or EMICODE EC1 <br />EMICODE EC1, EC1 PLUS , EC1R or EC1 PLUS -R</p> <p>Quality Level 4</p> <p>Reference: D15-1659 / 09.05.2016</p> <p>Produktdeklaration - DGNB Neubauversion Büro- und Verwaltungsgebäude (NBV15)</p> <p>MANUFACTURER</p> <p>SCHOMBURG GmbH & Co. KG</p> <p>PRODUCT NAME</p> <p>ASODUR-SG3-Superfast</p> <p>Relevant Products <br />23</p> <p>Epoxy surface-coatings of floor, <br />ceiling and wall - also in system <br />structures <br />Subject: seals, 2-component epoxy <br />coatings, EP floor coatings except OS systems for parking, etc.</p> <p>Other remarks on classification</p> <p>Requirements of Quality Levels <br />Quality Level 1</p> <p>GISCODE <br />RE0, RE1, RE2</p> <p>Quality Level 2</p> <p>GISCODE <br />RE0, RE1</p> <p>Quality Level 3</p> <p>GISCODE <br />RE0, RE1</p> <p>Quality Level 4</p> <p>GISCODE RE0 and RE1 + <br />Building approval in system <br />(building permit AbZ) or a <br />certificate of compliance to DIN V <br />18026: 2006-6 together with <br />evidence of compliance with <br />emission requirements of AgBB by <br />DIBt recognized testing authority</p> <p>Assessment of Product</p> <p>Evaluation</p> <p>GISCODE RE 1</p> <p>Quality Level 3</p> <p>Reference: D15-1659 / 09.05.2016</p> <p>Produktdeklaration - DGNB Neubauversion Büro- und Verwaltungsgebäude (NBV15)</p> <p>MANUFACTURER</p> <p>SCHOMBURG GmbH & Co. KG</p> <p>PRODUCT NAME</p> <p>ASODUR-SG3-Superfast</p> <p>The product contains the following components: <br />K1 ASODUR-SG3-Superfast</p> <p>Mass per <br />unit [%] <br />100%</p>
