52.0
Page 1/8
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 22.02.2021 *
Version number 21
Revision: 22.02.2021
SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: ASODUR-K4031 (A-Komp.) · 1.2 Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. · Application of the substance / the mixture Epoxy resin adhesive · 1.3 Details of the supplier of the safety data sheet · Manufacturer/Supplier: SCHOMBURG GmbH & Co. KG Aquafinstr. 2-8 D-32760 Detmold Germany ---------------------------------------------Tel: ++49 (0)5231/953-00 email: info@schomburg.de web: www.schomburg.de · Informing department: Product Safety Department Tel: ++49 (0)5231/953-193 email: SDB@schomburg.de
*
SECTION 2: Hazards identification · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 GHS07 Skin Irrit. 2 Eye Irrit. 2 Skin Sens. 1
H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction.
Aquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects. · 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation. · Hazard pictograms GHS07 · Signal word Warning · Hazard-determining components of labelling: 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Epoxy Phenol Novolak Resin oxirane, mono[(C12-14-alkyloxy)methyl] derivs · Hazard statements H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects. · Precautionary statements P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. (Contd. on page 2) GB
Page 2/8
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 22.02.2021
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 1)
P363 P501
Wash contaminated clothing before reuse. Dispose of contents/container in accordance with local/regional/national/ international regulations.
· 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. · Determination of endocrine-disrupting properties 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane: List II Epoxy Phenol Novolak Resin: List II *
SECTION 3: Composition/information on ingredients · 3.2 Mixtures · Description: Mixture of substances listed below and non-hazardous additions. · Dangerous components: CAS: 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] EINECS: 216-823-5 bisoxirane Aquatic Chronic 2, H411; Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317 Specific concentration limits: Eye Irrit. 2; H319: C ≥ 5 % Skin Irrit. 2; H315: C ≥ 5 % CAS: 68609-97-2 EINECS: 271-846-8
10-25%
2.5-10%
oxirane, mono[(C12-14-alkyloxy)methyl] derivs Skin Irrit. 2, H315; Skin Sens. 1, H317, EUH205
EC number: 701-263-0 Epoxy Phenol Novolak Resin Aquatic Chronic 2, H411; Skin Irrit. 2, H315; Skin Sens. 1, H317 · Additional information For the wording of the listed hazard phrases refer to section 16.
SECTION 4: First aid measures · 4.1 Description of first aid measures · General information Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. Personal protection for the First Aider. It is possible to choke in case of vomiting in unconsciousness. Bring unconscious persons into a stable position on side. Keep the respiratory tract free (remove dentures and vomiting). Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage of breathing: artificial respiration. Take up a doctor immediately! · After inhalation Supply fresh air or oxygen; call for doctor. In case of unconsciousness bring patient into stable side position for transport. · After skin contact After contact, clean the skin mechanical and rinse with water and soap. Change immediately contaminated clothes. · After eye contact Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. · After swallowing Drink copious amounts of water and provide fresh air. Instantly call for doctor. Show the pack or the label to the doctor. (Contd. on page 3) GB
Page 3/8
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 2)
· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. · 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures · 5.1 Extinguishing media · Suitable extinguishing agents CO2, extinguishing powder or water jet. Fight larger fires with water jet. · 5.2 Special hazards arising from the substance or mixture Formation of poisonous gases during heating or in fires. · 5.3 Advice for firefighters · Protective equipment: Wear self-contained breathing apparatus. · Additional information Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. Follow the emergency-plan. SECTION 6: Accidental release measures · 6.1 Personal precautions, protective equipment and emergency procedures Bring persons out of danger. Wear protective equipment. Keep unprotected persons away. · 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. · 6.3 Methods and material for containment and cleaning up: Pick up the product mechanically, avoid dust formation. · 6.4 Reference to other sections See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. *
SECTION 7: Handling and storage · 7.1 Precautions for safe handling Keep away from children. · Information about protection against explosions and fires: No special measures required. · 7.2 Conditions for safe storage, including any incompatibilities · Storage · Requirements to be met by storerooms and containers: No special requirements. · Information about storage in one common storage facility: Please follow the rules of the VCI-Storage-Concept for chemicals. · Further information about storage conditions: Keep container tightly sealed. · Storage class 13 · 7.3 Specific end use(s) No further relevant information available.
SECTION 8: Exposure controls/personal protection · 8.1 Control parameters · Components with critical values that require monitoring at the workplace: 13463-67-7 titanium dioxide (<1%) WEL Long-term value: 10* 4** mg/m³ *total inhalable **respirable · Additional information: The lists that were valid during the compilation were used as basis. (Contd. on page 4) GB
Page 4/8
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 3)
· 8.2 Exposure controls · Appropriate engineering controls It must be possible to wash the skin in the working area. Eye-wash bottle must be available. · Individual protection measures, such as personal protective equipment · General protective and hygienic measures The usual precautionary measures should be adhered to in handling the chemicals. Instantly remove any soiled and impregnated garments. Avoid contact with the eyes and skin. Be sure to clean skin thoroughly after work and before breaks. · Breathing equipment: Not required. · Hand protection Hand Protection: Nitril-rubber-latex-gloves. · Material of gloves Nitril-rubber-latex-gloves II R: Thickness 0,5mm; Break through time 480 min The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye/face protection Safety glasses · Body protection: Protective work clothing. Contaminated protection clothes must be cleaned carefully before reuse. *
SECTION 9: Physical and chemical properties · 9.1 Information on basic physical and chemical properties · General Information · Physical state Solid · Colour: grey · Smell: Characteristic · Odour threshold: Not determined. · Melting point/freezing point: Not determined · Boiling point or initial boiling point and boiling range not apply · Flammability Not determined. · Lower and upper explosion limit · Lower: Not determined. · Upper: Not determined. · Flash point: Not applicable · Self-inflammability: Product is not selfigniting. · Decomposition temperature: Not determined. · pH Not applicable. · Viscosity: · Kinematic viscosity Not applicable. · dynamic: Not applicable. · Solubility · Water: not miscible · Partition coefficient n-octanol/water (log value) Not determined. · Steam pressure: Not applicable. (Contd. on page 5) GB
Page 5/8
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 4)
· Density and/or relative density · Density at 20 °C · Relative density · Vapour density
1.4 g/cm³ bulk density Not determined. Not applicable.
· 9.2 Other information · Appearance: · Form: Pasty · Important information on protection of health and environment, and on safety. · Explosive properties: Product is not explosive. · Change in condition · Evaporation rate Not applicable. · Information with regard to physical hazard classes · Explosives · Flammable gases · Aerosols · Oxidising gases · Gases under pressure · Flammable liquids · Flammable solids · Self-reactive substances and mixtures · Pyrophoric liquids · Pyrophoric solids · Self-heating substances and mixtures · Substances and mixtures, which emit flammable gases in contact with water · Oxidising liquids · Oxidising solids · Organic peroxides · Corrosive to metals · Desensitised explosives
Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void
SECTION 10: Stability and reactivity · 10.1 Reactivity No further relevant information available. · 10.2 Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · 10.3 Possibility of hazardous reactions Reacts with strong acids and oxidizing agents · 10.4 Conditions to avoid No further relevant information available. · 10.5 Incompatible materials: No further relevant information available. · 10.6 Hazardous decomposition products: No dangerous decomposition products known *
SECTION 11: Toxicological information · 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 · Acute toxicity Based on available data, the classification criteria are not met. · LD/LC50 values that are relevant for classification: 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Oral LD50 >15,000 mg/kg (rats) Dermal LD50 23,000 mg/kg (Kan) (Contd. on page 6) GB
Page 6/8
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 5)
Epoxy Phenol Novolak Resin Oral LD50 >5,000 mg/kg (rats) (OECD 401) Dermal LD50 >2,000 mg/kg (rats) (OECD 402) 68609-97-2 oxirane, mono[(C12-14-alkyloxy)methyl] derivs Oral LD50 >5,000 mg/kg (rats) Dermal LD50 >4,500 mg/kg (rabbit) · Skin corrosion/irritation The product has an irritate-effect. Causes skin irritation. · Serious eye damage/irritation Causes serious eye irritation. · Respiratory or skin sensitisation May cause an allergic skin reaction. · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity Based on available data, the classification criteria are not met. · STOT-single exposure Based on available data, the classification criteria are not met. · STOT-repeated exposure Based on available data, the classification criteria are not met. · Aspiration hazard Based on available data, the classification criteria are not met. · Additional toxicological information: Sensitizing · 11.2 Information on other hazards · Endocrine disrupting properties 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane: List II Epoxy Phenol Novolak Resin: List II 128-37-0 Butylated hydroxytoluene: List II *
SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane LC50/96h 2 mg/l (for) EC50 (48h) (static) 1.8 mg/l (Daphnia magna) ERC50 (static) 11 mg/l /72h (Scenedesmus capricornutum) IC50 >42.6 mg/l /18h (bacterial toxicity) Epoxy Phenol Novolak Resin LC50/96h 5.7 mg/l (Leuciscus idus) EC50 (48h) 2.55 mg/l (Daphnia magna) EC50 1.8 mg/l (Selenastrum capricornutum) (OECD 201) IC50 (static) >100 mg/l /3h (activated sludge bacteria) 68609-97-2 oxirane, mono[(C12-14-alkyloxy)methyl] derivs LC50/96h >5,000 mg/l (rainbow trout) EC50 (48h) (static) 7.2 mg/l (Daphnia magna) (OECD 202) EC/LC50 (72h) 844 mg/l (algae toxicity) IC50 (static) >100 mg/l /3h (activated sludge bacteria) (OECD 209) NOEC 500 mg/l /72h (Pseudokirchneriella subcapitata) · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential No further relevant information available. · 12.4 Mobility in soil No further relevant information available. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. (Contd. on page 7) GB
Page 7/8
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 6)
· vPvB: Not applicable. · 12.6 Endocrine disrupting properties For information on endocrine disrupting properties see section 11. · 12.7 Other adverse effects · Additional ecological information: · General notes: Water hazard class 2 (Self-assessment): hazardous for water. Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil. *
SECTION 13: Disposal considerations · 13.1 Waste treatment methods · Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · European waste catalogue HP4 Irritant - skin irritation and eye damage HP13 Sensitising HP14 Ecotoxic · Uncleaned packagings: · Recommendation: Disposal must be made according to official regulations. SECTION 14: Transport information · 14.1 UN number or ID number · ADR, ADN, IMDG, IATA
Void
· 14.2 UN proper shipping name · ADR, ADN, IMDG, IATA
· 14.3 Transport hazard class(es) · ADR, ADN, IMDG, IATA · Class
· 14.4 Packing group · ADR, IMDG, IATA
· 14.5 Environmental hazards: · Marine pollutant:
No
· 14.6 Special precautions for user
Not applicable.
· 14.7 Maritime transport in bulk according to IMO instruments Not applicable. · UN "Model Regulation":
SECTION 15: Regulatory information · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Directive 2012/18/EU · Named dangerous substances - ANNEX I None of the ingredients is listed. (Contd. on page 8) GB
Page 8/8
Trade name: ASODUR-K4031 (A-Komp.) (Contd. of page 7)
· DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment – Annex II None of the ingredients is listed. · National regulations · Technical instructions (air): · Class Share in % · NK 0.1 · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. *
SECTION 16: Other information These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Relevant phrases H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. EUH205 Contains epoxy constituents. May produce an allergic reaction. · Department issuing data specification sheet: Environment protection department. · Contact: Mr. Guido Herfort · Date of previous version: 22.02.2021 · Version number of previous version: 20 · Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative Skin Irrit. 2: Skin corrosion/irritation – Category 2 Eye Irrit. 2: Serious eye damage/eye irritation – Category 2 Skin Sens. 1: Skin sensitisation – Category 1 Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2 Aquatic Chronic 3: Hazardous to the aquatic environment - long-term aquatic hazard – Category 3
· * Data compared to the previous version altered. GB