Technical Datasheet ASO®-Dichtband-2000-S-Ecke Corner seal for high loads
Material number
Angle / installation position
Width, article
Material strength
Contents
Packaging
Colour
205933001
90° inside
14 cm
approx. 0.5 mm
1 piece
piece
White with SCHOMBURG logo
205933002
90° outside
Product features Tear-resistant Particularly stretchy watertight UV-stabilised Highly resistant to aggressive media Very low emission
Advantages Thin-layer Guarantees the drying out of waterproofing materials and thin-bed mortar Reliability through prefabrication
Areas of application For the forming of watertight corners System component made from ASO®-Joint-Tape-2000-S System component made from ASO®-Joint-Tape-2000
Areas of application For the forming of watertight corners System component made from ASO-Joint-Tape-2000-S System component made from ASO-Joint-Tape-2000
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/3
17/08/2023
Technical Datasheet ASO®-Dichtband-2000-S-Ecke Technical Data Material properties Product components Base material UV-resistance as per DIN EN ISO 4892-3 Vapour diffusion behaviour
Piece goods Composite material: Fleece-membrane-fleece ≥ 500 hours Vapour permeable
Application Consumption
1 pc per application
Application technology Aids/tools Flat trowel
Suitable substrate All substrates in accordance with DIN 18157, Part 1 and in accordance with DIN 18534, DIN 18535, DIN 18531, DIN 18533 All substrates in accordance with ZDB Code of Practice "Bonded waterproofing (AIV)"
Usage Application 1. On both sides of the joint to be bridged or the wall connection, the waterproofing material is applied at least 2 cm wider than the joint sealing tape. 2. Lay ASO®-Dichtband-2000-S-Ecke in the fresh layer. 3. Press the ASO®-Dichtband-2000-S-Ecke into the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. 4. Joint-tape edges or connections to pre-formed pieces are applied with an overlap of 5 cm to 10 cm. 5. Bond joint-tape edges or connections with the waterproofing material without wrinkles, covering the whole area, and overcoat after. 6. ASO®-Dichtband-2000-S-Ecke must be seamlessly integrated into the area waterproofing.
Storage conditions Storage Cool, dry, protected from sunlight. Min. 24 months in the original container.
Disposal Product leftovers can be disposed of in household waste.
The recognised standards of construction engineering, the relevant guidelines and current regulations must be observed.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/3
Technical Datasheet ASO®-Dichtband-2000-S-Ecke Annotations Chemical durability
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/3