ASO-Dichtband-2000-Ecke_205943_Englisch.pdf
3 Pages
851 KB
Download
<h1>ASO-Dichtband-2000-Ecke_205943_Englisch.pdf</h1> <p>Technical Datasheet <br />ASO®-Dichtband-2000-Ecke <br />Corner seal for heavy loads</p> <p>Material number</p> <p>Angle / installation position</p> <p>Material strength</p> <p>Contents</p> <p>Colour</p> <p>205943001</p> <p>90° outside</p> <p>approx. 0.5 mm</p> <p>1 piece</p> <p>White</p> <p>205943002</p> <p>90° inside</p> <p>approx. 0.5 mm</p> <p>1 piece</p> <p>White</p> <p>Product features <br />Fleece-laminated corner joint <br />Tear-resistant <br />Highly flexible and stretchy <br />Highly resistant <br />Crack bridging</p> <p>Advantages <br />Tested system product <br />Particularly thin layers <br />High bonding to cementitious waterproofing slurry or polymer dispersions thanks to fleece-laminated surface</p> <p>Areas of use/bonded waterproofing <br />as system components for the Schomburg joint tape system for reliable waterproofing and integration of expansion, movement and edge <br />connecting joints in bonded waterproofing <br />As a system component for bonded waterproofing for water impact class W0-I to W3-I in accordance with DIN 18534</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Burst pressure <br />Reaction to fire in accordance with DIN EN 4102 <br />UV-resistance as per DIN EN ISO 4892-2 <br />Sd value in accordance with DIN EN 1931 <br />Temperature resistance <br />Vapour diffusion behaviour</p> <p>Piece goods <br />Composite material: Fleece-membrane-fleece <br />≥ 2 bar <br />B2 <br />500 hours <br />> 30 m ± 5 m <br />- 22 + 90 °C <br />Vapour diffusion-inhibiting</p> <p>Application <br />Consumption</p> <p>1 pc per application</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>11/08/2023</p> <p>Technical Datasheet <br />ASO®-Dichtband-2000-Ecke <br />Application technology <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Flat trowel <br />Brush <br />Pressure roller <br />Scissors/knife</p> <p>Suitable substrate <br />Dry screeds <br />Raised floors <br />Tile bearing elements <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7.</p> <p>Dry <br />Load-bearing <br />Even <br />Sealed in the surface <br />Free of cracks <br />Free from negative pressing water <br />Free of adhesion inhibiting substances</p> <p>Usage <br />Application <br />1. Apply the waterproofing material to both sides of the joint or wall transition to be bridged, at least 2 cm wider than the joint sealing tape that is <br />used (e.g. using a 4–6 mm notched trowel). <br />2. Press the ASO®-Dichtband-2000-Ecke into the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. <br />3. The joint sealing tape must be seamlessly integrated into the area waterproofing. <br />4. Bond joint-tape edges or connections with the waterproofing material without wrinkles, covering the whole area, and overcoat after. <br />5. Joint-tape edges or connections to pre-formed pieces are applied with an overlap of at least 5 cm. <br />6. For structural movement joints, ASO®-Dichtband-2000-Ecke is inserted into the joint and the fresh layer in the form of a loop. <br />7. For structural movement joints/movement joints, the pre-formed pieces are inserted into the joint and the fresh layer in the form of a loop.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 24 months in the original container.</p> <p>Disposal <br />Product leftovers can be disposed of in household waste.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, lines 9, 35, 44 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment".</p> <p>Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB sheets of the Zentralverband Deutsches Baugewerbe e.V.) in the latest <br />version.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>11/08/2023</p> <p>Technical Datasheet <br />ASO®-Dichtband-2000-Ecke <br />Annotations <br />Chemical durability</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>11/08/2023</p>
