ASO-Dichtmanschette-Boden_205938_Englisch.pdf
3 Pages
424 KB
Download
<h1>ASO-Dichtmanschette-Boden_205938_Englisch.pdf</h1> <p>Technical Datasheet <br />ASO®-Dichtmanschette-Boden <br />Waterproofing preformed sections for floor drains</p> <p>Material number</p> <p>Length</p> <p>Width, article</p> <p>Material strength</p> <p>Contents</p> <p>Packaging</p> <p>Colour</p> <p>205938001</p> <p>45 cm</p> <p>45 cm</p> <p>approx. 0.51 mm</p> <p>1</p> <p>piece</p> <p>White with <br />SCHOMBURG <br />logo</p> <p>Product features <br />Fleece-laminated floor collar <br />Individually adjustable <br />Tear resistant <br />Highly flexible and stretchy <br />Extra thin <br />Highly resistant <br />Crack bridging</p> <p>Advantages <br />Tested system product <br />Can be adjusted individually to the required diameter <br />High bonding to cementitious waterproofing slurry or polymer dispersions thanks to fleece-laminated surface</p> <p>Areas of use/bonded waterproofing <br />To integrate floor drains and intersections into the bonded waterproofing system <br />As a system component for bonded waterproofing for water impact class W0-I to W3-I in accordance with DIN 18534</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>29/06/2023</p> <p>Technical Datasheet <br />ASO®-Dichtmanschette-Boden <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Burst pressure <br />Expansion, crosswise (DIN EN ISO 527-3) <br />UV-resistance as per DIN EN ISO 4892-2 <br />Sd value <br />Sealing against pressing water until <br />Temperature resistance <br />Vapour diffusion behaviour</p> <p>Piece goods <br />Composite material: Fleece-membrane-fleece <br />≥ 1.5 bar <br />> 600 % <br />500 hours <br />>1m <br />1.5 bar <br />- 22 + 90 °C <br />Vapour diffusion behaviour</p> <p>Application <br />Consumption</p> <p>1 unit per pipe penetration</p> <p>Application technology <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Flat trowel <br />Brush <br />Pressure roller <br />Scissors/knife</p> <p>Suitable substrate <br />Dry screeds <br />Raised floors <br />Tile bearing elements <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7.</p> <p>Dry <br />Load-bearing <br />Even <br />Sealed in the surface <br />Free of cracks <br />Free from negative pressing water <br />Free of adhesion inhibiting substances</p> <p>Measures for substrate preparation <br />Instructions for substrate preparation can be found in the technical data sheet of the selected sealing material.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>29/06/2023</p> <p>Technical Datasheet <br />ASO®-Dichtmanschette-Boden <br />Usage <br />Application <br />1. Lay ASO®-Dichtmanschette-Boden over the floor drain flange. <br />2. Mark out the size of the flange and cut out the required opening. <br />3. Clean and degrease the flange. On flanges with a surface made of stainless steel for example, additional primer made of reaction resin such as <br />ASODUR®-GBM may be required. <br />4. Apply the selected waterproofing material to the prepared substrate. <br />5. Pull the sealing sleeve over the flange. <br />6. Press the sealing sleeve into the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. <br />7. The sealing sleeve must be integrated into the area waterproofing seamlessly. A tight connection to the area waterproofing must be made.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 24 months in the original container.</p> <p>Disposal <br />Product leftovers can be disposed of in household waste.</p> <p>Notes <br />Pipe penetrations that are secured with ASO®-Dichtmanschette-Boden must be protected adequately against mechanical damage. <br />ASO®-Dichtmanschette-Boden may not be glued or overcoated afterwards with products containing solvents.</p> <p>Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB sheets of the Zentralverband Deutsches Baugewerbe e.V.) in the latest <br />version. <br />Annotations <br />Chemical durability</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>29/06/2023</p>
