Technical Datasheet AQUAFIN®-TC07 Flexible 2 component sealing mortar
Material number
Contents
Unit of quantity
Packaging
Colour
204212001
30
KG
Set
light grey
Product features resistant to concrete-damaging water, in accordance with DIN 4030 Hydraulic setting
Advantages Resistant to frost, de-icing salts, UV and ageing Highly resistant to wear and abrasion Can be applied by brush, spatula and spray Watertight up to 5 bar easy and economical application Adheres to matt damp substrates without primers Vapour permeable
Fields of application / waterproofing As a waterproof protective coating On concrete, masonry work, plaster or screed For substrates that are subsequently not subject to cracking without pronounced movement For positive and negative water pressure For interior and exterior use
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/4
20/09/2023
Technical Datasheet AQUAFIN®-TC07 Technical Data Material properties Product components Base material Consistency Density, ready to use product (ISO 1183-1) Crack bridging PG MDS / FPD Compressive strength (7 days) Compressive strength (14 days) Compressive strength (28 days) Tensile adhesion strength DIN EN 1542
2 component system Polymer-mortar combination Filler consistency approx. 2 kg/dm³ to 0.1 mm approx. 18 N/mm² approx. 21 N/mm² approx. 25 N/mm² ≥ 1 N/mm²
Mixing Mix ratio, component A Mix ratio, component B Mixing time
4 weight proportion 1 weight proportion approx. 3 minutes
Application Substrate/application temperature Method of application, max. layer thickness per application step Second application step after waiting time Foot traffic after Pot life Pressurised water resilient after
from 5 °C to 30 °C to 1 mm approx. 4 - 6 hours approx. 24 hours approx. 30 - 45 minutes ≥ 7 days
Material consumption Material consumption rate according to the area of application
Application technology Aids/tools Stirrer (approx. 500-700 rpm) Suitable mixing paddle Trowel Serrated or layer-thickness trowel Flat trowel Brush Spray equipment
Manual processing Can be trowelled off Applicable with a brush
Machine application AQUAFIN®-TC07 can be mechanically applied. For precise information, see the additional Technical Information No. 43.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/4
Technical Datasheet AQUAFIN®-TC07 Suitable substrate Cement plaster Masonry work Concrete Cement screed (CT)
Substrate preparation Requirement for substrate 1. 2. 3. 4. 5. 6.
Frost-free Load-bearing Even Pore open Sealed in the surface Free of adhesion inhibiting substances
Preparing the details 1. Depressions > 5 mm and mortar pockets, plaster grooves in brickwork, open butt or bed joints, damaged areas, large pored substrates or uneven masonry work must be levelled in advance with ASOCRET-M30 (cement-based mortar). 2. Dips < 5 mm should be levelled with ASOCRET-M30.
Preparing the surface 2. Pre-moisten the dry substrate so that it is matt damp at the time of application. 3. Extremely absorbent and slightly sandy substrates must be primed with ASO-Unigrund-GE or ASO-Unigrund-K.
Pipe penetrations For the watertight formation of pipe penetrations, the system components of the ASO-Joint-Sleeves are to be used in accordance with their technical data sheets.
Usage Mixing 1. Fill approx. 80% of the liquid component into a clean mixing bucket and mix with the powder component to produce a homogeneous, lump-free mass. 2. Pre-mix for approx. 3 minutes. 3. Finally, add the rest of the liquid component and mix sufficiently. 4. Additional water addition is not permitted.
Waterproofing 1. Apply AQUAFIN®-TC07 in a minimum of two application steps ensuring it is free of pores. 2. The second application step (and those following) may be completed once the first application step cannot be damaged (4–6 hrs, depending on the ambient conditions). 3. An application thickness of more than 2 kg/m² in one application step can lead to cracking.
Movement and connecting joints For watertight formation of moving and connecting joints, use ASO-Joint-Sealing Tape system components in accordance with their technical data sheets.
Storage conditions Storage Store in a frost-free, cool and dry place. At min. 5 - 40 °C for 12 months in the original canister. Promptly use opened canister.
Disposal Product leftovers can be disposed of in accordance with disposal code AVV 17 01 07.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/4
Technical Datasheet AQUAFIN®-TC07 Notes Protect surfaces that are not to be treated from the effects of AQUAFIN®-TC07! The waterproofing must not be affected by water while it is binding. The effect of water from behind can lead to spalling in case of frost. In case of strong sunlight, work against the movement of the sun in shaded areas. In rooms with high humidity and/or insufficient ventilation (e.g. water containers), dropping below the dew point (condensation formation) may occur on the surface. This must be avoided by taking suitable measures such as by using condensation dryers. Direct heating or uncontrolled blowing warm air is not permissible. AQUAFIN®-TC07 may not be subjected to punctiform or linear loads as the surface coating. Direct contact with metals such as copper, zinc, and aluminium must be avoided by means of a pore sealed primer. A pore sealed primer is produced via 2 application steps using ASODUR®-GBM (see technical data sheet). On PVC, gunmetal, and stainless steel flanges, ASO® joint sleeves or alternatively ADF® pipe gaskets must be installed without voids or wrinkles and integrated seamlessly into the waterproofing. Protect the fresh coating from rain, wind, frost and direct sunlight. In the service water tanks, temperatures around +10 °C to +15 °C are usually expected. In order to ensure complete hydration of the cement, the coating is kept damp for a sufficiently long period (constant relative humidity of > 80%) and protected against drying. 7 days are generally sufficient for this. At high temperatures, the surface may be slightly sticky. In this case, we recommend curing with water to ensure complete hydration. No water may be added to AQUAFIN®-TC07. AQUAFIN®-TC07 is suitable for bridging minor static shrinkage or hairline cracks up to 0.1 mm. It is not suitable for bridging larger or nonstatic cracks.
GISCODE: ZP1 (Komponente A), D1 (Komponente B)
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 4/4