AQUAFIN-1K-PREMIUM_204609_Englisch.pdf
7 Pages
1.46 MB
Download
<h1>AQUAFIN-1K-PREMIUM_204609_Englisch.pdf</h1> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />1 component Flexible waterproofing slurry</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>204609001</p> <p>15</p> <p>KG</p> <p>Bag</p> <p>blackish brown</p> <p>Product features <br />Flexible, 1 component waterproofing slurry <br />Crack bridging <br />Can be walked on and overcoated after just ca. 4 hours <br />Vapour permeable</p> <p>Advantages <br />Tested system component <br />rapid construction progress <br />Convenient compaction properties</p> <p>Areas of use/bonded waterproofing <br />As bonded waterproofing under tiles and boards <br />As bonded waterproofing for water impact class W0-I to W3-I in accordance with DIN 18534 <br />In conjunction with the SCHOMBURG joint tape systems <br />For interior and exterior use</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/7</p> <p>27/07/2023</p> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />Existing test certificates <br />General building approval test certificate for producing liquid bonded waterproofing with tiles and boards in accordance with VVTB seq. no. <br />C 3.27 <br />Reaction to fire classification report <br />Impermeability to water in accordance with DIN EN 14891 <br />French cert. VOC <br />AgBB certificate <br />EMICODE licence</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Crack bridging DIN EN 1062-7 <br />Sd value DIN EN ISO 7783 (H2O) per mm dry layer thickness <br />Vapour diffusion behaviour <br />Water vapour diffusion resistance µ (DIN EN ISO 7783) <br />Watertightness when installed in accordance with PG MDS/AIV <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>1 component system <br />Pre-blended dry mortar <br />Powdered <br />Passed <br />approx. 2.3 m <br />Vapour permeable <br />approx. 2300 <br />to 0,75 bar <br />E</p> <p>Mixing <br />Mixing time <br />Maturing time <br />Water addition</p> <p>approx. 2 - 4 minutes <br />approx. 2 minutes <br />from 3.8 l to 4.5 l</p> <p>Application <br />Substrate/application temperature <br />Pot life <br />Method of application, max. layer thickness per application step <br />Consumption pro m² and mm layer thickness <br />Foot traffic after <br />Ready for covering with tiles <br />Overcoat after <br />Hardening time / light resilience</p> <p>from 5 °C to 30 °C <br />approx. 45 minutes <br />to 2.5 mm <br />approx. 1.25 kg/m² <br />approx. 4 hours <br />approx. 4 hours <br />approx. 4 hours <br />approx. 7 days</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/7</p> <p>27/07/2023</p> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />System components according to AbP AIV <br />Joint Sealing tape</p> <p>Tile adhesive</p> <p>ASO-Dichtband-2000 <br />ASO-Dichtband-2000-S <br />ASO-Dichtband-2000-Ecken (Innen und Aussen) <br />ASO-Dichtmanschette-Boden <br />ASO-Dichtmanschette-Wand <br />ASO-Dichtband-120 <br />ASO-Dichtecke-I <br />ASO-Dichtecke-A <br />ASO-Dichtmanschette-W <br />ASO-Dichtmanschette-B <br />ASO-Dichtband-2000-S-Ecken <br />AK7P <br />CARO-FK-FLEX <br />CRISTALLIT-FLEX <br />LIGHTFLEX <br />MONOFLEX <br />MONOFLEX-fast <br />MONOFLEX-FB <br />MONOFLEX-white <br />MONOFLEX-white 3:1 with UNIFLEX-F <br />MONOFLEX-XL <br />SOLOFLEX <br />UNIFIX-S3 <br />UNIFIX-S3-fast <br />ASODUR-EKF</p> <p>Application technology <br />Aids/tools <br />Flat trowel <br />Broad paint brush <br />Spray equipment <br />Serrated or layer-thickness trowel <br />Stirrer (approx. 500-700 rpm) <br />Trowel</p> <p>Manual processing <br />Can be trowelled off <br />Applicable with a brush</p> <p>Suitable substrate <br />The suitability of the substrate must be checked and observed, taking into account the planned water impact class of DIN 18534 and DIN <br />18531. <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Tile bearing elements, gypsum fibre boards, gypsum boards, raised floors, cement and fibre cement boards, decoupling mats & panels, dry <br />screeds <br />Firmly adhering tiled finishes <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/7</p> <p>27/07/2023</p> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7.</p> <p>Dry <br />Load-bearing <br />Even <br />Sealed in the surface <br />Free of cracks <br />Free from negative pressing water <br />Free of adhesion inhibiting substances and laitance layers</p> <p>Preparing the surface <br />1. <br />2. <br />3. <br />4. <br />5.</p> <p>Check the substrate and determine the residual moisture content using the CM method. <br />Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />Prime absorbent substrates with ASO-Unigrund-GE or ASO-Unigrund-K. <br />Prime non-absorbent substrates with ASO-Unigrund-S. <br />Level surface irregularities in the substrate before starting waterproofing work using a cementitious levelling compound that is suitable for the <br />application (e.g. SOLOCRET-50 or ASOCRET-M30).</p> <p>Moisture content of the CM measurement</p> <p>Usage <br />Mixing <br />1. Put the water into a clean mixing bucket and mix with the powder component with a stirrer to produce a homogeneous, lump-free mass. <br />2. The mixing time is ca. 2 - 4 minutes.</p> <p>Application <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7. <br />8.</p> <p>Prepare the substrate according to the substrate requirements. <br />Allow the primer to dry before the subsequent work steps. <br />Apply AQUAFIN®-1K-PREMIUM using suitable tools in at least 2 application steps. <br />The previous coat must be completely dry before the next coat is applied. <br />The minimum dry film thickness of ≥ 2 mm must be guaranteed. <br />A sufficient amount of material must be applied to achieve the required dry film thickness in accordance with the desired water impact class. <br />Voids must be reworked. <br />Tiles and boards are laid (in accordance with DIN 18157-1 in thin-bed laying) after readiness to receive a thin-bed mortar that was tested in the <br />system.</p> <p>Formation of intersections, movement and connecting joints <br />Use the ASO-Joint-Tape-2000 system or the ASO-Joint-Tape system along with the required pre-formed pieces to form movement and <br />connecting joints, as well to integrated intersections and assembly parts. The joint sealing tape and the pre-formed pieces are embedded in the <br />first layer of waterproofing material and covered with the second layer. Transitions and or connections between joint tapes and pre-formed <br />pieces must be formed with an overlap of 50 mm. Check elements such as linear drainage systems for suitability in advance and include them in <br />the bonded waterproofing in accordance with the manufacturer’s specifications.</p> <p>Cleaning tools <br />Rinse tools immediately with water. Dissolve dried material with ASO-R001 and wash off.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 9 months in the original canister. Promptly use opened canister.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/7</p> <p>27/07/2023</p> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />Disposal <br />Product leftovers can be disposed of in accordance with disposal code AVV 17 01 01.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, lines 7 and 8 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment". <br />Suitable for indoor use in accordance with the evaluation scheme of the AgBB (committee for health-related evaluation of building products) <br />and the "French VOC regulation" (French VOC classification regulation and KMR emissions regulation)</p> <p>Notes <br />Direct contact with metals such as copper, zinc, and aluminium must be avoided by means of a pore sealed primer. <br />Dropping below the dew point (condensation) must be prevented during the application and drying phases on the substrate and AQUAFIN® <br />-1K-PREMIUM. <br />Expect a longer drying time in rooms with low temperatures, high humidity and insufficient ventilation. Direct heating is not suitable for these <br />rooms. <br />Protect surfaces that are not to be treated from the effects of AQUAFIN®-1K-PREMIUM! <br />The waterproofing must not be affected by water while it is binding. The effect of water from behind can lead to spalling in case of frost. <br />The CM measurement must be completed in accordance with the current working instructions FBH-AD from the technical information <br />"Interface coordination with heated floor constructions". <br />Protect the product from water, frost, draughts, direct sunlight and mechanical loads until it has dried completely.</p> <p>Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB sheets of the Zentralverband Deutsches Baugewerbe e.V.) in the latest <br />version. <br />GISCODE: ZP1 <br />Annotations <br />Conformity / Declaration / Verification</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />5/7</p> <p>27/07/2023</p> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />System components (conforming to standards)</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />6/7</p> <p>27/07/2023</p> <p>Technical Datasheet <br />AQUAFIN®-1K-PREMIUM <br />Impact classes and typical applications in accordance with DIN 18534-1</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />7/7</p> <p>27/07/2023</p>
