Technical Datasheet ADF®-Dehnfugenband Elastic sealing tape
Material number
Length
Width, article
Material strength
Contents
Packaging
Colour
205955001
50 m
15 cm
approx. 0.8 mm
1 piece
Roll
Grey with SCHOMBURG logo
205955002
25 cm
Product features Particularly stretchy Tear-resistant watertight Bitumen-compatible
Advantages Highly flexible and stretchy
Fields of application / waterproofing For the watertight waterproofing of connection and movement joints Waterproofing in accordance with DIN 18533 in combination with cementitious waterproofing slurries (MDS), flexible polymer-modified thick coatings (FPD) and bitumen thick layer coatings (PMBC)
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/3
08/07/2023
Technical Datasheet ADF®-Dehnfugenband Technical Data Material properties Product components Base material Burst pressure UV-resistance as per DIN EN ISO 4892-3 Vapour diffusion behaviour
Roll goods Composite material: Fleece-membrane-fleece ≥ 1.5 bar ≥ 500 hours Vapour permeable
Application Consumption
Approx. 1 m/m
Waterproofing
AQUAFIN-2K/M-PLUS AQUAFIN-RS300 AQUAFIN-RB400 COMBIDIC-2K-CLASSIC COMBIDIC-2K-PREMIUM
Application technology Aids/tools Scissors/knife Flat trowel Pressure roller
Suitable substrate All substrates in accordance with DIN 18157, Part 1 and in accordance with DIN 18534, DIN 18535, DIN 18531, DIN 18533
Substrate preparation Requirement for substrate 1. 2. 3. 4.
Firm Free of adhesion inhibiting substances Frost-free Load-bearing
Preparing the details Any damaged areas or unevenness must be compensated with ASOCRET-M30.
Usage Application 1. On both sides of the joint to be bridged or the wall connection, the waterproofing material is applied at least 2 cm wider than the joint sealing tape. 2. Lay ADF®-Dehnfugenband in the fresh layer. 3. Press the ADF®-Dehnfugenband into the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. 4. Bond joint-tape edges or connections with the waterproofing material without wrinkles, covering the whole area, and overcoat after. 5. Joint-tape edges or connections to pre-formed pieces are applied with an overlap of 5 cm to 10 cm. 6. In the case of loop-shaped installation and pressurised water load, additionally insert a suitable closed-cell filler cord and stick on another ADF®Dehnfugenband with the help of the waterproofing material.
Storage conditions Storage Cool, dry, protected from sunlight. Min. 24 months in the original container.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/3
Technical Datasheet ADF®-Dehnfugenband Annotations Chemical durability
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/3